Illini22
Gold Member
- Joined
- Aug 14, 2007
- Messages
- 469
- Location
- Northern Illinois
- Tractor
- 2013 Kioti dk40 hst, wright stander zero turn
I ran the hoses last week from the rear remotes to the fel. I thought I had the wrong Quick connects for the rear, but did get them to seat in the female end today. My lines are a little long but that's better than to short. I really don't like all the slop I have where the front connections are. A bulkhead connection is in my future.
My grapple and QA 42" forks came from Titan industries. Everything was secured to a wood pallet. Te grapple also has a very nice steel cage all around it with small casters ( very small) on the corners. Very nice job! The spacing on the flanges that connect the grapple or forks to the loader looks fine. The shipping was fast too. Everything looks heavy duty.
My grapple and QA 42" forks came from Titan industries. Everything was secured to a wood pallet. Te grapple also has a very nice steel cage all around it with small casters ( very small) on the corners. Very nice job! The spacing on the flanges that connect the grapple or forks to the loader looks fine. The shipping was fast too. Everything looks heavy duty.
Attachments
Last edited: