Recent content by Agrantina

Kubota 3240 Hydraulics I have a 3240 with NO front end loader-- I am wanting to use the factory outlets for the front end loader to work a grain drill wheels- my buddy is going to pay to have the hoses made. What I need to know is what size are the fitiings (female) that plug into the...

I have a 3240 with NO front end loader-- I am wanting to use the factory outlets for the front end loader to work a grain drill wheels- my buddy is going to pay to have the hoses made. What I need to know is what size are the fitiings (female) that plug into the factory out lets? and which ones...

Next to one of our plots the farmer has a stand of corn-- It looks good as we have had good rain, but some of it has some type of head on them? Like a deformed corn husk? Anyone know what it is??

I was out at my buddies farm yesterday afternoon and we notice that his 3pt hitch would leak down as soon as we turned the tractor off. It wouldnt take more than a few seconds before what ever attachment we had on the hitch to slowly go to the ground. It got dark before we could look at it but...

Completely disassembled cleaned, sanded, primed, painted and re-assembled. I am happy with the outcome. We planted 6 ac of sunflowers before I restored and it worked great- now it looks the part! AndyG

I need some help with this planter- Can I get a 2 TBN Volunteers to ride along and drop seed in the tube on a few acres? :confused2::thumbsup: AndyG

Bought a new 3pt spreader the other day at it has the settings listed by large, med, small granular fertilizer . Big difference in the setting per size.. My question is what size is 15-15-15 co-op brand???? Never seen it listed by size?? AndyG

I have a JD model 51 that I have redone and ready to test. My question is about row markers. This is a 2 row planter so when I make my first pass I need a row marker on the planter to mark where the second row would go. I am thinking - that row maker would be made in the ground on the first pass...

Any ideas what model this planter is? and if its a good planter? AndyG

We are going to put in a 6ac sunflower field this yr for a dove hunt in Sept. I need some advice on how to plant them. Land is normal farm land which was beans last yr. So tilling/ discing will not be a problem. Let me start by saying I have L3240- 6ft disc, 5ft cutter, 5 ft tiller...

I had my water pump go out in my Chevy 05 2500 4x4 duramax a few weeks ago and ran across this post on a diesel forum. Instruction are dead on except the time frame. I fixed mine for about 1/4 the cost of taking it to the dealer guys! thought others might benefit from it also...

I am looking to buy a drill press and was wondering if anyone had any suggestions? I am looking at both kinds of drill presses- bench mounted and stand alone. Will use it mostly for metal- up to 1/4 to 1/2 inch and would like to stay under $500 any ideas? 120v AndyG

I messed up the plastic guard on my pto shaft this past weekend. I got it apart and cant seem to find just the plastic tube? Its the smaller one that I need to replace. I cut the part out but now its to short about 3 inches. Can I buy just the plastic tube some where? The shaft is off a Big Bee...

Lets see those fall plots... I have several all are oats, red & white clover, austrian peas and winter rye mix... Well one has radishes and no peas? but I dont have a picture of it... I planted all but the radish plots on Labor day with rain 18 days later and so its thin in these pics. Got good...