Recent content by Bandit2026

What can I paint my radiator on my 8n with? I heard enamel paint will make it heat.

What is the proper way to check trans fluid, lift up or down?? :(

If my voltage regulator on my 8n sticks when I shut it down, would that cause it not to start??

Looking at buying a used kawa terex 700 2013. Would like to hear real world report form owners, top speed and how dependable are they.

My faithful ol 8n has died on me again. Having had this problem several months ago and after much help from this forum it ran like new. Problem was traced to tracking in distributor cap. Now it has happened again after only about 2 hours run time. Any ideas why??

Once again I need some help. Redoing my 8n and it never had any brakes so Son and I decide to redo the brakes. After we disassembled and cleaned every thing we reassembled and after about the 3rd use , no brakes. Took one wheel apart and its got oil on the brakes. We really took our tine to...

Starting a slow restore of my 8n not for show just a good cleanup. Was getting where it would miss a lick once in a while so I got a tractor supply tune up kit. Installed and fired right up all was good. After about 2 mos of very cold storage she would not fire. Getting fire to front mount coil...

I purchased a box blade, 5 footer used, and I find its not heavy enough. I'm looking for ways to add some weight but not change the operation. Any Ideas??:confused:

Wanting a wire welder before I knew better I bought a cheapo from tractor supply. Didn't need something big as I have a new stick welder, a good one. Now in trying to learn how to use this puppy I went to tractor supply and got a resin core tip, won't fit. I also got a pack of .030 tips won't...

My son and I want to put a third function on a ck35. We have most of it figured out except fitting to replace banjo fitting. Also mounting of some parts. I'm sure someone has done or had it done for a grapple. Would love to have some pictures to help this along. Thanks

Just finished 50 hour service, no problems. Now after I put 7 and1/2 gallons of fluid in the trans and let it run and even worked a little, it checks on the lower mark. What is the proper way to check, with loader extended or retracted?

I want to build a cattle guard from wood. I think it would be easier than installing a commercial made from concrete and a lot cheaper. I'm thinking rough cut 2x8s spaced 4" apart. It will lay on solid ground. Anyone ever see any plans for such a thing? Are have anyone ever tried this? Thinks

My son and I bought a CK 35 Kioti with the front loader. now I would like to get a set of forks mainly to load round bales with. With some ballast on the rear will this tractor handle them??