Recent content by expedoman55

I few days ago I broke the shear pin on my boomer 2 stage blower.. No big deal you say but.. it was the pin on the auger.. NO way to get a drift pin punch and hammer in there to drive out the old pin.. I tried to figure out how I could get to that pin without taking the blower apart. So I took...

I have a 60" new holland front mount snowblower on my boomer tractor. I blow 4 family driveways that are all in excess of 15' wide and 200' long. Over the last 8 years I have worn through 2 sets of skids.. I am considering mounting a pair of trailer jack caster wheels (with crank for...

Ok so I am trying to adapt a JD plow ( ONLY because it was available) to my NH TZ22Da... I have the mounting completed and now I am trying to adapt my hydraulic hoses to the cylinder.. Can anyone tell me what the dang thread is on the cylinder.. NOTHING seems to fit it locally.. My NH dealer...

Hey Guys looking for some help. My tz22da has a Cms 60 has 3 high lift blades that I swap in the spring and then mid summer to ensure the blades are sharp.. Since I changed blades in the spring my blades seem to spin free on the hubs as if I cannot get enough tension on the blade to tighten it...

mine are just kid toys compared to ya'll.

Hey guys, Last week while snowblowing in -33 windchill weather.. my boomer started coughing and hacking and died after a quick rough no power idle. would start and quit.. I pulled it into my heated 50 degree garage and after a warm up all is well again.. I presumed the fuel jelled or there is...

I have decided to sell the bucket loader and mounting system from my TZ22da. I have a larger NH with a bucket and hoe so I don't need this little guy. I paid 2900 for it in 07 and it has not been used but a half a dozen times and stored inside all its life. So with a little wash and repaint of...

I am considering a life change and retiring from industry to become a gentle man farmer and doing some light crop farming. I have a TC34Da and some clear(fields) acreage and wondered if my TC34 is large enough to do some light plowing etc. The fields have been tipped in the past and today have...

Hey guys. I am trying to get a firm answer on hydro levels for front axle. Can someone confirm how to check the level correctly? Here is what I have been doing while fluid is cold and level in barn: unscrew dipstick, wipe stick dry, then place stick in well and NOT screw in. It is my...

This is the first winter with our TC34DA. Now that the weather is getting cold consistantly when we use the tractor on a cold day in 4wd there is a wheezing sound in the front of the tractor. I assume the sound is from the front axle as it is up front and I am in the drivers seat while it is...

Howdy. We are the happy owners of a TC34 and TZ22. Bigblue and babyblue respectively of course. This is our first year with the TC34 through a winter. In the past I have simply treated the fuel with HEET and been ok. The TC34 has a block heater. I plan to use it with the bucket for big snow...

Hey all I have a TZ22DA with a rigid ROPS. The next model year has a FOPS and I would like to purchase one or convert mine to FOPS. Any suggestions on whether it can be done( my son is an excellent welder). Anyone want to sell a FOPS or trade for a rigid version. I believe the new 10 series is...

Hey all, I know many of you have had much much more experience with barns and storage blds than I. I have attached a pic of my present barn that has a bad roof. The wind has torn up the top or the barn off and it is leaking and now needs to be replaced. I am considering asphalt...

Do any of you have any experience with the NH 9CG grass catcher for the TC TZ? I am looking for one used( as least the drive line) to use on my TZ along with some other grass equipment.

Ok so at the risk of showing my complete stupidity.. and lack of experience :o and without going to the barn and looking at the tractor what direction does the PTO turn when I face the back of tractor? Do any tractors have or use reversable PTOs? Sorry for dumb question as i am sure you...