Recent content by rockaukum

Ordered a replacement valve today. Thanks for the help on solving this issue. rockaukum

That is / was the plan. Cheap Orings? Not on this one. Check the picture, the smaller one is $8.65 each and the larger one is $24. If I want to do the dust seals (which I should as good practice) those are $58.25 each. There are other items as well but just to get it back running again that...

I agreee completely! Upon inspection of the valve disassembled, one seal was completely missing (disintegrated?) so I do need to replace them. the others were very brittle and also need replacing. That is my problem, $300 for a couple seals and orings? That is why I looking into other options...

As a follow up.... I was able to source a diagram and parts list for this valve. Unfortunately the guy said the valve (Diesel Kiki) is no longer available. Doing a search for the washers and seals he informed me that the individual parts are available.... In order to get the 4 washers, 4 seals...

I have a 1984 ford 1710 with The 770B loader. It is controlled via the diesel Kiki control valve (44703 307104-5540). The valve is leaking when under load. I have searched the net for info on this valve with little to no luck. I am thinking of rebuilding the valve and If that is not an...

84 Ford 1710, has six bolts that mount the motor, per side. While replacing the o-rings on the hyd pump to priority valve, I discover that four of the six bolts on the right side are sheared off, I made the mistake thinking I could use an easy out, mistake as it broke off. Now thinking I can...

Hey, I have a 84 Ford 1710 and recently have been having issues with the three point settling once the tractor is shut down. Seems to be specific to the three point as the loader stays up just fine. I have also noticed that there is a distinctive pulsing in the hyd system and I can see the...