This unit is about 18 months old with 354 hrs. I use bucket, grapple rake and tree puller on the FEL.
Recent problem with the joystick cables coming unscrewed at the ball joints were fixed by dealer after 3 tries.
I go out today and the loader lifts, lowers, curls but will not roll the quick...
My neighbor gave me this mower yesterday along with a piece of a part that I have identified as part of the variable speed pulley.
Check photo. What could cause this to happen? I have the part ordered but don't want to end up with another broken part.
Also any tips on how to change out the...
Traded my 2014 LS J2023H w/ 50" Loader and AG mini grapple for 2016 LS XG3032-4L w/ 60" loader and 60" AG grapple.
I loved the J2023H but for the majority of work I do which is pushing over cedar trees and lifting the root balls up out of the ground I need a tractor with a bigger foot print and...
My original thread posted in another forum but may it should be in this forum.
http://www.tractorbynet.com/forums/parts-repairs/346683-ls-j2023h-ignition-switch-problem.html#post4268373
The tractor is 6 months into warrenty with less than 80 hours. I recently got it back from the dealer in...
I shut down the tractor this morning and went inside for breakfast. When I came out to start it there was not dash lights nor would the engine turn over. I removed the panel to which the switch is mounted to access the fuses. The fused ok. While the panel off and switch still connected I turned...
I have 60 hours on my new LS2023H and the muffler is cracked just above the manafold mounting flange. It is nearly broken all the way around.
The only thing i can figure is the bracket that secures the exhaust pipe is not aligned so that when tightened the setup is torqued so much it creates the...