Recent content by theSeb

Hi all, This may be a daft question, but I am wondering if it is possible to make wood "shavings" instead of chips with a wood chipper. I have read some stuff that indicates that it is possible with a wood chipper, but before I spend money on a PTO chipper for my tractor and rush into a...

I ploughed one of the paddocks today using a very old 2 furrow non-reversible plough.

4 ton trailer Here is my aerator 3 metre chain harrow (~118 inches) in the transport position

Sure, will post more pics. It worked well, but the photo is nearly a year old, and it was my first ever ploughing effort. It may not have been perfect, but it did the job. I went from this To this A couple of weeks later And then another few weeks later

Some pics from "sunny" England and my little 5065E hard at work. I haven't used her since December and I am itching to get back into the tractor seat. Weather is starting to look ok and the fields are starting to dry out. Building a shed. The reason for the rope? We have had gales with...

Hello from England. I have a Sicma rototiller (or rotavator as we call them) and I have lost the manual for it. Before I give the dealer a call, what grade/viscosity oil should I be putting into it? For reference, I think it's the same thing as this Phoenix T15-GE Series Heavy Duty 80" 3...

You need a flail mower, as already suggested. You said that HP does not matter. Well it does. You can get a flail mower that needs 40 HP, or you can get one that needs 120+ HP, so how much HP does your tractor have? I use a flail mower for cutting heavy grass and rushes. The cutting width is...

Thanks :) A lot of hard work has gone into it in the last couple of years and it's starting to come together. The tractor is "Euro spec" so it's a bit different to what you're used to. The front load is a 533 with self levelling and they replaced the standard joystick with the fancier and more...

There are many factors that come into this like the type of soil, the gradient and so forth so trying to make some x hp / foot rule and sticking to it isn't always a good idea. You have a pretty powerful tractor and you should be using implements that match it correctly, otherwise you're just...