Recent content by Ultradog MN

I'm not a fan of rattle can jobs. The paint fades and does not last. For touch ups or even big areas I use a brush. Get a 1 1/2" china bristle brush and have at it. Takes two coats usually and I add a wee bit of thinner to the second coat to get it to flow better. Here's a couple of photos of...

SOS transmission out of a 1966 Ford 4000. This is the deluxe model with 540/1000/ground drive pto. You get from the flywheel back. This transmission works perfectly in all 10 forward/2 reverse gears. Am replacing it with an 8 speed. Will also fit 4400, 4500, 4410 and 3550 models. You can also...

My galoot tractor. A 66 Ford 4200.

Big George, Do yourself a favor and buy a couple of manuals for your tractor. See photo. They are chock full of pertinent info like this. The drain for the rear axle is underneath just in front of the drawbar hanger. Sorry but I aint gonna crawl under there to snap a photo for you. Fill with...

Here is a photo of the hard to find hip bracket that Soundguy mentioned. This will allow you to attach a 3 1/2" box loader onto a 4 cylinder tractor. Jeff pk, if you don't mind, where is this one arm loader you were looking at? I'm kinda, sorta, maybe thinking about adding ine of these loaders...

Need a picture of the bolster to be sure but you probably have the light one. That must be an early 68 as it still has the old style tin. They changed the tin in April of 68. Mine was a smooth hood. Photos show both style bolsters. The one with the axle attached is the light/ early one. I may...

Here is my cobbled up little Ford 3000 diesel. It's built out of parts and pieces from at least a dozen different tractors. 6' Bush Hogｮ makes her grunt a little but it does great with it. I'm building a Ford 4400 D. Hoping to have it done this summer.

I'm looking at an early 90s 260C. According to the ad this machine has "Mechanical Assist front wheel drive, forward - reverse shift, electric pedal disconnect, lock out torque converter, 8 speed transmission Hi-Lo, PTO - 540 rpm, 3 pt hitch" Tractor does not have a loader. I am not finding much...

Yes it will pull and lift it fine if you don't have some massively heavy unit. I use an 8' Ford 201 that i restored a few years ago. Behind my 3000. Nice combo. You will need some ballast - either fluid in your tires or wheel weights to get good traction. I have inner wheel weights on the...

Hi all. I'm still looking for one front bumper weight for my Ford tractor. Thanks for any leads.