aczlan
Good Morning
- Joined
- Mar 7, 2008
- Messages
- 18,078
- Tractor
- Kubota L3830GST, B7500HST, BX2660. Formerly: Case 480F LL, David Brown 880UE
We recently got a Kubota RTV500 and have needed a trailer that fits in its wheel track to pull into the woods.
A while back I took apart and scrapped a trailer frame (was originally a popup that the previous owner made into a flatbed). I kept the wheels and will be using those under the trailer.
The rest of the frame will be made of a chair rack that was getting thrown out by someone and some angle iron that we have on hand. If I get real ambitious, I might see if I can make the tongue hinge to allow the trailer to dump. Below are some pictures of the mockup before I cut it down:
From the front:
Front corner:
From the back:
I may look into replacing the tires with some wider ones at some point, but for now they will work
Aaron Z
A while back I took apart and scrapped a trailer frame (was originally a popup that the previous owner made into a flatbed). I kept the wheels and will be using those under the trailer.
The rest of the frame will be made of a chair rack that was getting thrown out by someone and some angle iron that we have on hand. If I get real ambitious, I might see if I can make the tongue hinge to allow the trailer to dump. Below are some pictures of the mockup before I cut it down:
From the front:
Front corner:
From the back:
I may look into replacing the tires with some wider ones at some point, but for now they will work
Aaron Z