Search results

Hi, I have a G1800, and after this last snow storm which I used the blower for, I started having problems going in reverse. I thought there was snow under the pedal, but it would just not move. Now when I start cold, I have to rev the engine high to start to get it just to move forward. To...

My Kubota TG2742, which attach's to the front of my G1800 ate a rock...a big rock. Bunch of bent stuff. Now, I need to get the shaft input, the shaft that comes off the PTO and the fan is on, out of the gear box. The auger shaft just slid out, it was simply keyed. There are four bolts that...

I damaged a bunch of stuff last weekend when I sucked up a big rock in my Kubota blower. My gear box is keyed, and when you remove the augers, you can slide the gear box and the key falls out. it slides up/down the shaft great till you hit the shear pin holes. I suspect that there is damage...

Help! Need to Remove Snow Blower Shaft Does anyone have an idea on how to remove the gear box from the auger shaft of the snow blower, a TG2742? The shaft is keyed and the gear box slides nicely up and down the shaft, but when I get to the shear pin holes, it stops. I looked at the...

Help! Need to remove blower shaft from gear box. I need to remove the shaft from the gearbox on my snow blower, TG2742 The shaft is keyed and the gear box slides nicely up and down the shaft, but when I get to the shear pin holes, it stops. I looked at the schematics, don't see anything...

Last weekend, I discovered the hard way that my wife put some landscaping rock on the walk to our door.I have a TG2742 Kubota two stage blower, it's on the front of my G1800. The fan was shot. I ordered in a new fan, auger bearings and figured out eventually that you disconnect the shaft from...

Somehow during yesterday's Nor'Easter, I managed to bend, really bend the fan on the blower. So now I need to get it out to repair/replace. I am sure this is going to not be fun, but I will need something to do in case it rains and they postpone the eagles game so they don't get wet. 1993...

This sounded easy enough, but when I opened the drain in the block to drain the anti-freeze, nothing came out. Figure the thermostat was shut. I presseraurizes the system till it started draining. Now I am wondering if I messed up thermostat by doing this. Thoughts? Thanks

I decidednto put a block heater on for this winter. After last winter, I'm not taking any chances. This turned into quite the little fiasco. After finally finding the frost port and getting the plug out, I inserted the heater, moving it back and forth to center as best as possible. I screwed...

Yes, 300 is not an error. My father bought this in 1993. After 6 months he didn't like it, too small. Used the blower once. Doing a lot of work on it to bring it up to par. I'm **** retentive, I even wax my tractors. This tractor is somewhat ironic when I picked it up this year in that I...