Search results

still available

Yes FEL is controlled by two tractor mounted controls in the bottom of driver seat on the driver's right hand.

Having issues with my hydraulic system. My FEL was working perfectly and about 5/6 months ago from one day to the other it got really sluggish and slow, slowly lost power to lift. Changed oil and no change. now mechanic was finally able to look at it and said it needs a new pump. ( Keep in mind...

They are selling me this drilling rig runned by a Kubota. He has no clue about how just says it's 4cly turbo

Help my new to me tractor won't start or has a really hard time starting. Ran it out of diesel, refilled ,purged bolt right on top of fuel filter, And started right up. but ever since then it has a really hard time starting have to crank a whole lot and sometimes it bites sometimes it takes a...

Need help with my loaded. When ever I try and backdragging my bucket comes off. ? I put my pins under load with a jack and I think I might need new springs? Or longer backstops

What do I line this up or where do I find the markings. I found the 4 on the pump gear. Do I just keep turning the motor until I line it up with another four in the lower gear . But as for the flywheel I can't seem to find a dial to mark it too.??

I can't seem to figure out how to set my tractor to top dead center, so I can remove the injection pump. I looked at the manual , but I don't know what marks am I suppost to line up. how do I load up pictures.

hey guys , need some help, just bought a 2014 new to me t5070 4x4. it runs great but when i shuttle shift 5-6 times i get the <!> light and a CP code. im stumped. and have no idea what it might be. i also feel the clutch pedal extremly soft anyway to adjust that? thanks in advance

Iam looking to replace most bushings in my case 580sl boom. The dealer wants and arm and a leg. Anyone have any experience finding them elsewhere.any experience with an aftermarket provider?

build a big pond to harvest water so I can irrigate my avocado trees.need help with welding my membrane liner. Anyone have any experience with this? Most people around here use a leister comet wedge welder. Considering its over 11k to cover it and trying to go the diy route. Anyone have any...

Hey guys need some advise. I can get a cheap boom off an old phone/cable truck and wanted to modify it and mount it kn back of my tractor,to use as a pruning tower. Something like this. How hard can this be or were do I start can I use the tractors hydraulics? Something like this...

hey guys looking for a air blast type sprayer. anyone have any experience with them? what is the main difference between a pto type and a engine driven one. what kind of hight can i expect to get. have any idea were can i find a decent one used? what brand so i look for?

anyone know how something like this works?? would it be too hard to build or if they sell a kit of some sort. I have a straight truck too big to turn the box into a dump. so Im looking at something like this. Burley Silage Trailer CU3410 Unloading.avi - YouTube

I cant seem to get the hydraulic system to run right, since I changed the fluid. It was leaking from the top of the steering pump, were it meets a black plate with four big bolts. I improvised a homemade gasket, and that seem to stop the leaking. But now the hydraulic pump makes a wining noise...

hey guys/gals. was wondering if you guys could help me out. my tn75s recently started leaking , what i believe to be hydraulic fluid, from the steering colum. does anyone know where i can see a diagram or have any idea what should i look for. P.S. diagram would be of huge help , but cant find...

Does anyone have a diagram or can tell me how to set up a s newholland tn 75 fuel pump timing. Its a three cylinder motor

Was wondering if someonw could help me out with replacing my pump from my orchard sprayer, im running two gun on it . I currently have an IP 100 pump Rittenhouse | IP 100 and want to replace it with an IP d245 Rittenhouse | IP D245 Pump . I know it is a bigger pump but im concern with the hight...

can someone tell me what is the difference between these two gearboxes just don't want to order the wrong one. 40Hp Gear Box Splined Gearbox 40 Hp, Splined Input Shaft

looking for a chipper for my avocado farm out in mexico . was thinking if this was a good enough chipper? and if the price was decent? Wood Chipper

bought a used mower, I can't seem to find any information on it. It looks very similar to this one, not the exact one, my question is, can i buy two gearboxes from like agrisupply ( are they any good?, which one to get) and replace both since i can't seem to find any information on the mower...

my 3pt stopped working all of a sudden. I was mowing stopped to get a bite, turned the tractor back on and my hydraulics wouldn't lift anymore. I checked the oil, filters, etc. PTo works fine, I messed around with it trying to figure out what might be the problem, and broke a lever thats on the...

found a 99 tn75s with low hours tires are almost new, he is the second owner. I will be using this with a bushhog and to pull a 2000ltr orchard sprayer. Owner said it runs prefect but third gear went out on original owner hes had it for 5yrs with out a problem . He's letting it go for 10k. Is...

im looking to build something similar to this, to help trim avocado trees. the fab works, looks really simple. need help on figuring out what type of blades ,how to run them and what type of hydraulic motor to use. Bubco Tree Hedger.wmv - YouTube