Search results

i have a friend who after seeing my attachments, has also bought a few of them! ETA has a winning combination!

Food plot work.

I'm planting oats and the recommended seed depth is between 1.0-1.5 inches deep. What's the best method to bury them a drag or a disk set to cut straight? Thanks

Hello, I have a 4025 with 50 hours and not sure if changing the oil before the recommended 100 hours is the right thing to do. I've been told that the initial oil has some additive to help during the break in, not sure how true that is. Are there any dealers on this forum that could help? Thanks

It's been about 12 years since I did any upkeep on my driveway, finally got it done today.

You won't regret waiting for the ETA's grapple, everything I have from them is as good as it can be!

I'll erase the second one, kind of frustrating when that happens. I'm sure I only hit the button once.

Sorry for the double post, not sure how that happened.

erased the double post.

I tried EA's 5ft cutter for a few hours, I like it! Also used the disk harrow for the first time as well, very impressed with it! A picture of the ground before and after.

Congrats scrob! Post some pictures when it comes in please! Everyone ordering grapples is freaking me out!

You may have the right idea going with the 66 inch, save some money over the 72. Maybe I'll be able to swing it next spring. Post some pictures when you receive it, if you don't mind.

Congrats Stuart! I want the 72 inch single lid real bad! I could really use it on my most recent food plot, the excavator made a mess removing all the stumps.

I received three items last fall, scrape blade,disk harrow and 60in bush hog. The scrape blade got heavy use this winter, I put some skids on it and it was awesome! Like it better than I thought I would. The disk harrow will see use in two food plots this summer, beautifully built! For some...

I have four pieces built by ETA, there exceedingly well built!

Sounds just like New Hampshire! Congrats on the new equipment.

I received my E.T.A brush cutter today and it looks awesome! Every single seem is welded top and bottom, very nice! The only weak point I can see would be the front and rear guards, I think chains may be better. I personally will never have a problem with them because it's a food plot tool and...

This may sound dumb, but I have no idea so I'm going to ask. Is it possible to remove the two hydraulic lines for the dump function from my joystick and in there place connect the right and left angle for a plow? Will this damage the cylinders on the loader for the bucket dump? Thanks

I have never used a brush cutter, so I'm looking for recommendations on what weight cutter a Mahindra 4025 can handle easily. I'm looking for the heaviest 60in cutter I can use comfortably on this tractor. The tractor is over 6000lbs with the loader and loaded tires with a three point hitch...

I'm considering upgrading to a larger tractor. And really like the simple ruggedness of the 2605 But I can't believe it doesn't have a differential lock on that size! I am getting 4x4 but I really believe I need the diff lock, I've used mine many times. Can someone recommend an alternative to...

Should be able to do a fine job installing food plots this spring,the only thing missing is a brush hog. Once I get one of those it should be complete. Agrex XA250 spreader Fred Cain ripper/field tillage Everything attachments landscape rake 3.0 Everything attachments 60in. Cultipacker

Perhaps someone with first hand experience can help. Looking for someone with first hand experience using a brush hog with there 2516. What size cutter can safely be used with this tractor? Approximate weight is around 2900lbs with loader and filled tires. Some say never use a 5ft. Rotary...

I finally saved up enough cash to get all but the brush hog for installing and maintaining the series of food plots I have. I've been doing most of the work manually so this should be a huge improvement labor wise and should also increase the quality of my efforts! I bought a Fred Cain 5 shank...

+1! 1000%

I have no affiliation with everything attachments at all, but in my experience US made equipment is just built better and lasts longer!

I'm considering a farmi winch for my Mahindra 2516 and I'm looking at the farmi JL290 which is rated for 17 to 30 PTO HP. The winch weighs 390lbs Would this be a good match for my tractor?

Thank you!

I have a question about tractor size and your implements. I have a Mahindra 2516 25hp and with loader and loaded tires it's around 2500lbs I believe. The width from the outside to outside back tires is 54.3 inches. I'm looking at a few implements from your site: your extreme duty disk...

Noticed on there website the elimination of the 1816 and 2516.

Can someone tell me what size threads are on the outside of the transmission used to connect a mid mower? There are three on each side. I was mistakenly sent the wrong size bolts.

I'm looking to get a plow for my 2516. Would like information on two systems from someone with experience on uneven slightly hilly gravel driveway. I'm looking at a pin on plow blade using the float function and a sub mount blade also using the float. The FEL bucket absolutely sucks at moving...

I found this sub mounted snow plow in a search and wondered if anyone has one or can tell me how well it works? My tractor is a mahindra 2516 4x4 shuttle. Thanks

Has anyone retro fitted the ratchet rake to there three point hitch! If so

I recently bought a ratchet rake to grade my driveway and food plots, as well as a very slick grapple made by small wood lot tools. The ratchet rake works as described and is very handy, but the grapple is absolutely incredible for skidding out full length logs without the use of chains...

I came home last night to find a hat from Mahindra in the mail,anyone else get one of these? I bought my 2516 in April.

Just tought I'd share a couple of pictures of my little tractor,it's a Mahindra 2516 and I'm really liking it! I added some rear chains and made a plate that stretches across the roll bar with a few hooks for logging chains, and I'm waiting on a vertical saw grip to hold the Stihl.

Hello all, I just received my first tractor from the dealer a week ago,a new Mahindra 2516 with a front end loader. It will be used to move snow,maintain my food plots,grading my driveway and wood cutting for the woodstove at both my house and camp. So far I like this tractor.