Search results

Anybody have any experience with the factory MF/Agco pallet forks. Looking at buying a set along with one of their pin type quick tach's for my Agco ST34 with SL46A loader (twin to MF 1533 w/1525 loader). Looks like a pretty nice set up, and I can get them bought pretty cheap. Basically...

I've got an AGCO ST34, which is a twing to a MF1533, and wondered if it was possible to widen the front tires. It appears that the wheels that my R4 tires are mounted to are offset to the inside, so in theroy, switching sides on them would widen the front wheels by approx. 2 inches. Anyone have...

Has anyone bought/used the quick tach shown in the loader manual? Not the skid steer type, but the more basic one with the two large pins on the bottom that you pull out to disengage the bucket. Just wondered if anyone had any opinion or experience to share.

Any of you Mahindra guys know where I could find a custom fit heat houser for a 6520? The guys at Femco that make them for mahindra do not make one for this model, and say that mahindra wont let them make one at this time. Any suggestions?

Since we don't warrant our own section, I'll jump in here with the MF guys. I've got an Agco ST34, which is a twin to your 1533's, and the loader cylinders seem to be acting up. With the bucket off the ground and partially curled, I can actually get the bucket to curl 6" to 8" buy lifting up on...

Just got done touring the local farm sale site and found two nice sized IH 530/540 manure spreaders. Any idea what something like this should bring in the midwest. Tires, chains, floors, and sides looked good on both, look like they've been used recently.

Anybody put a heat houser on a newer compact lately? Do you actually get enough heat generated to be bennificial or is it a waste of money. I've been looking at stuff on this site from femco FEMCO, Inc. Called and they were getting $425 plus s&h, thought it might be worth it to stay warm if I...

How big of a spring tooth can I pull. I have a 35 PTO HP agco with a standard transmission. Looking at a 6' or 7' spring tooth with either 11 or 13 teeth on it. Working up an arena, so the grounds relatively soft to begin with. Just wondered if anyone had any experience with something like this.

I've been shopping, and I know everyone says landpride and befco mowers are the best thing with blades, but just how much difference is there from those to the King Kutters? In Iowa it saves about $600 to buy the KK vs. any of the nicer units. Just mowing house yard, less than 1 acre, looking at...

Looking for all of the experts opinion. Agco ST34@ is right at 60" wide, now I'm trying to decide if I should get a 60 or 72" rear finish mower. My 60" box blade covers my tracks perfectly, and I don't have to worry about catching it on anything since it doesnt stick out past the tractor. I...

Anybody have any experience with continuous fencing out there? Looking at using 16' panels mounted to wood posts every 8'. Heres a link to one of the brands that we have been looking at so far. http://www.priefert.com/dynamic/product.php?ITEM_NO=CFP516GY

Just purchased a new AGCO ST34A with FEL, and was wondering what the best location for work lights was. The tractor has great headlights, but as soon as you raise the FEL, they are gone. Was looking at fenders or ROPS maybe. Opinions???

custom-ML-828282-ML- Posted in wrong forum.

I have been shopping between an L3400 and L4400, both with FEL, and was leaning towards the L4400, but my dealer didn't recomend the gear drive transmission for the FEL. He thought I would be better off with the hydro option and the L3400. Anybody had any experience with these 2 models? I...

Just wondered what I should be asking for a L2500 with less than 200 hours on it. Very clean tractor, filled back tires, front weights, 4 work lights, and turf tires with chains. Good tractor for 75% of my work, but FEL and 4WD would save a lot of work if I could get this one sold.

60\" snowblower price Anybody have an idea what I should expect to pay for a new 60" rear mount snowblower?

Have an L2500 Kubota 2wd that needs some weight on the front. Dealer can order weights, but shipping is really high. Local JD dealer has weights in stock, but I don't know if they will fit, or how hard it is to make them fit.

Currently have a Kubota L2500 2wd that needs some weight on the front end. Dealer can order weights, but shipping is really high. Found the local JD dealer has weights in stock, just wondered if there was anybody that had tried mix & match on something like this.