Search results

What a great adventure… when we bought one 15 years ago, the good people on TBN gave us great advice and insights… just like those above… I’d add that you may want to drive around and see what your neighbors are using…. Compliment them on the nice fencing, mowing, road grooming they’ve done… Ask...

One thing that helped us was driving around the holler and noting which brand, size of tractor was in the field working and what type of work was being done….Tractors in barns or sheds we did not count… Sometimes we’d pull in a drive and the operator would come over… This gave us an idea what...

Saying goodbye to my 2007 Woods Brush Bull (BB60C)…. Woods are great implements… but these had a design flaw… the deck under side had reinforcing sleepers that hung down about 2 inches below deck…. Causing gear box shaft to extend down extra 2 to clear… this extra length in the shaft made it...

I had the same problem and fix as Deserteagle71…. It was on a Yamaha beat tracker…. Replaced stator…. Runs like a 1999 champ… I got a Chinese stator cheap and put it in to save money…. Watched a YouTube video to decide if doable…. To diagnose… check voltage at the spark plug wire when it runs...

Does anyone have experience with land survey apps...? I’ve read about “Theodolite”, but need a specific function... I’ve got two turn points, and need to walk between them and be able to tell when I cross that property line...

Ok... mowing near neighbor and he asks if my kubota could get down into creek to help place large rock to rebuild retaining wall on lower springhouse.... sure.... ground clearance and weight of L3400 really help.... more fun than mowing.... Neighbors get their water from my lower spring with a...

Good news story With 628 hours on the L3400 HST, when engaging the RFM, it would go clack, clack, clack as clutch was released. Thought the PTO clutch was slipping, so adjusted it out to fully engage clutch with about an inch of free travel on pedal. Not it. When the RFM PTO shaft was...

In 2007, an L3400 HST with FEL, BB, RFM and Rotary Cutter was purchased for about $21k in Middle Tennessee. The tractor is used on a 50 acre parcel that has been left in timber for about 40 acres. Parcel is hilly, with 300 feet of elevation from lowest to highest points. The attachments are...

We have 51 acres in Tennessee with a lot of "Up and Down". There's 300 feet of elevation from lowest point to hilltop flats. There are about 7 acres that currently get mowed, 1/2 mile gravel drive to house on hillside. There are another 7 acres that could be mowed if we had roads/trails to...