Search results

I cleared some land and got most of the brush burned off. Now I'm left with a bunch of piles of dirt with small pieces of wood in them. I have a grapple that I've used to shift through and get the large stuff out. What can I use to get the small stuff separated. I looked at on of the top soil...

I have a Kubota MX5100 that I would like to plant some grass seed in my yard with a no till grain drill. I don't have any rear remotes but I do have hydraulics on the front of my tractor to run my grapple. Can I get some more hydraulic hoses and temporarily attach to the front hoses and run...

I've got a few acres. About 7 or so that I need to level out . I need to move a fair amount of dirt from the top side to the bottom side. What do i need to do this. I've got a kubota mx5100. 50 hp tractor with a front end loader. I started off with a very cheap and half tore up box scrape and...

I'm looking to build a poll shed (40x60). I ran across some 4x4x1/8 tube steel at a pretty good deal and was wondering if it would be strong enough to hold the weight and stand the wind? I知 looking to make the post 14 tall, I can bury them in concrete or weld base plates and anchor them to the...

I looked at a set of old Athens offset harrows this weekend. They was the pull type. I have a MX5100, 4x4, R4 tires (loaded), and front end loader attached. This harrow is 7.5' wide. Looks to be really heavy. Would my tractor be enough to pull this harrow? I felt like it was a good deal @...

Looking to buy a set of disc harrows. I like the pull type that raise and lower with hydraulics. I don't have remotes on my mx5100 yet but I do have the 3rd function hydraulics that I use to operate a grapple. Can I just hook up to them with some more hydraulic hoses and run them back to the...

I'm fixing to cast myself a concrete ballast box (around 1500lbs) for my Kubota MX5100, I was planning on using an 1 1/8 round stock to connect to the 3pt hitch. Will the 1 1/8" round stock hold the weight without bending over time? Are the 3pt hitch pins hardened? I can use the Pins if I need...

I have a Kubota MX5100 4x4 gear drive and I would like to add some wheel weights to it. I was thinking around 1k (500lbs to each tire). I have a source to get some 1" plate just slightly above scrape price and have a waterjet at work that shouldn't be to much trouble to gain access to. My rims...

I'm looking to plant some sunflowers and corn for a dove field. I have a 2 row Allis Chalmers 70 series planters that I can adjust to two row or I can remove one and just do a one row. I will be pulling it with a Kubota MX5100 with R4 tires. My tractor is 74" outside of tires, the inside of...

I need a little help, I just acquired an old planter and I don't what plates to use. The planter is an Allis Chambers but from what I read I can use an adapter plate and run JD-71 plates. The 71 plates seam to be available more than Allis Chambers. I'm looking to plant Sweet/ field corn, also...

I've lost the pin on my landscape rake, the one that allows the rake to rotate. I know it needs to be 3/4 " But does it need to be hardened or will mild steel work? If it's mild steel I can throw one together today at work. If it's hardened I guess I'll have to buy one. So Hardened or mild steel?

I'm having some land cleared right now I've had about 4.5 acres pushed up. What attachments do I need to get the job finished. There are roots that need to be removed. And ground that needs to be smoothed out. I have a Kubota mx5100 and no attachments. I assume a good box scrape is a must...

I have a 2013 Kubota MX5100 and i'm looking to buy a grapple i've picked out one from carolina attachments there heavy duty model Heavy Duty Root Grapple - Carolina Attachments, LLC the weight on this grapple is 700 lbs. Is this too heavy for my tractor? The lift on my loader (LA844) is 1852...

Has anybody got any experience with the carolina attachments grapple? I'm looking to buy and seen these they are a little cheaper than others that i've priced but they still appear to be put together nice. some first hand feedback would be great.

I'm fixing to put a 3rd function kit on my MX5100 from fit right hydraulics and brian asked me what type of ag fittings i wanted. 2 females? 1 male 1 female? I've never had a grapple and i'm not sure what I need. What do grapples usually come with?

I'm fixing to pull the trigger on a 3rd function valve kit, I've looked at the kit from everything attachments 3rd function auxilliary hydraulic kits for all brands of tractors and loaders! purchase online, free shipping within 1,000 miles!! (made by W R Long) it looks like a good kit and sells...

I have a mx5100 with loaded tires. I read post where people have to have loaded tires, wheel weights and a ballist box in order to keep there tires on the ground when using there FEL. On my tractor i've picked up full buckets of rock/gravel with no problem i've even tried to pick up tree root...

I'm in the market for a 72" bushog and I ran across a used Heritage hc72 by woods. It looks to be like new the owner said he had only used it to cut about 10 acres and sold his small tractor and only has a large tractor so he uses his big bush hog. He's asking $1000 firm. Is this a good deal...

I have a two bottom turn plow that i've broke the point/blade on I need a replacement where can i get one?

I'm in the planning stages for a 72" grapple. I've been looking around and it really don't look that tough for a good welder/fabricator. My main question is how thick should the tines be? how long should they be? how high should they be? I guess it will be made out of A36 steel because it's...

looking to buy a 3 bottom turn plow and just wondering if my tractor will handle it. I have a kubota mx5100 with r-4 tires. tires are loaded