Search results

Hello. I went to turn off my BX 2360 and it just wants to keep working, it is refusing to shut off. I dont want to cut the power to the electric fuel pump and starve the injection pump of fuel. Any suggestions on what I can ground out to shut this bad boy off?

I dont know if this is the right forum but I am working on the rear disc brakes on my 1987 GMC 7000 dump truck and they are not wanting to come off. The only thing I see that can be holding them on is the four bolts on the inside of the caliper. Of course none of the nuts will come off, the...

I dont know if this is the right forum but I am working on the rear disc brakes on my 1987 GMC 7000 dump truck and they are not wanting to come off. The only thing I see that can be holding them on is the four bolts on the inside of the caliper. Of course none of the nuts will come off, the...

My new BX2360 was delivered on Friday, and it is the first SCUT I have ever driven. I LOVE the smooth power steering and the hydraulics are faster than I thought they would be. I operate some very large equipment for a living, including 345 Cat excavators and 988 Cat loaders, so this will take...

My dealer gave me a price of 11k for a BX 2360 and a 60" MMM. I think this is a good price but wanted to check here first. Thanks

These are the manufacturers who have dealerships near me that I am visiting tomorrow. I need a small 4x4 utility tractor for small tasks around my property. I have about 2 acres to mow so I want at least a 60" mower deck. I will be getting a snowblower and back blade probably as well as I have...

My 580C with a 207 diesel runs great when the engine is first started, and then for about 10 minutes afterward. Once it is up to full temp the motor starts to have a slight miss and is significantly down on power, and will sometimes stall. Once the engine stalls, if you fire it up again it will...

I have a 1987 GMC 7000 series dump truck with a two speed rear end. Well yesterday when only slightly stuck I snapped an axle. Now I cant get the axle out on the other side to tear the rear apart. The axle comes out about 3/4 of an inch and then stops. My only guess is that some material from...

Howdy everyone, I thought I would share some pics of my project I started in February of 2006 when I bought 18 acres of wooded property near Saginaw, Michigan. The property is in the floodplain of the Flint River, though it has not flooded for decades. I decided to clear about 2 acres of woods...

As if a 25 year old backhoe wasn't enough to keep me busy now I have a 20 year old dump truck, lol. I am going to be digging a pond soon for fill for my new house and this baby will be going to work. She has a 366 gasser and a 10 speed tranny. Not too bad for $5000 I dont think. It has a 5...

I have a steering cylinder that had a chance encounter with a stump and needs replacement. I am curious as to the best way to remove the rod end joints. I have pulled the pin but when I try to remove the nut the whole bolt/elbow assembly turns and I see no way to get a wrench on the elbow to...

Hello, I just purchased a 580C with some pretty weak brakes. Actually one doesnt work (pedal goes to the floor) and the other barely stops the tractor. The wheel on the side that doesnt work has evidence of brake fluid on the wheel. Are these brakes just simple drum brakes like on a truck? Is...

I am looking for a used TLB, and near me are a Deere 310a with about 6000 hours and a Case 580E, which is about 40 miles away. Price aside, are these two TLB's pretty much even? I have 18 acres and will ve clearing a few acres, making a driveway, and building a septic system, along with any...

Thanks for taking the time to help me make a decision. My wife and I just purchased 18 acres of woods and would like to build in 1-2 years. I am going to need a tractor to clear about 2-3 acres of woods. I am also going to need to make a driveway, a septic field, and I will have to move fill...