Search results

Hi! A friend gives me a old front end snowblower. The problem or trouble is bad rotation. I change rotation. Not easy! But I make it. First step! Change the output side. We must cut (I use a 4 1\2 in.Grinder with disk) the top of output important to cut at same height each side for 180 deg...

Hi ! Two weeks ago. I finnish mowing and come back at home. Bang! The PTO lever quit the U stand and go in and turn around the wheeel. result A rod PTO lever bend and the shift lever bent. I was lucky the PTO fork in trans was ok. The BCS lever system for gears and PTO are very fast for change...

Hi! I can use Old Gravely implements with my Grillo via my homemade adaptor. I try the rotary plow for first time this year. Run pretty well.. I like old Gravely implements. They have one adjustable safety clutch. So I can adjust the clutch for slip on big rocks or big roots . Can protect gears...

Yes For gearing.Some Goldoni have four front speeds as Jokers 11ds or 11s model or one working speed more than 740 BCS All Goldoni two wheels tractors are now supplied with a patented GEARSTOP device which meets the requirement of the EU safety directive EN 709.2010 Goldoni tractors are very...

Hi! I am working on a side mount sickle bar mower for two-wheels. I work on the drive system (very special) No pitman. All position sickle bar 45deg down and 90 deg up. I reduce 965 rpm speed to 640 by pulleys. Run very well empty. But Yesterday for first time I connect the moving cutting bar...

I like work soil with moldboardplow. This homemade steel wheels give incredible traction. I am plowing about 6 in. deep. Plowing add air. remove compaction but do not destroy all . Turn over soil about or less 135 deg. Plowing need less power than tilling. Later I till only 2 in. deep for good...

I just finish. Turn very tight less 7 ft. Very easy to dump. Very light. Engine torque transfert weigh to tractor So I think could be go with load on very steppy hills. I do not try again with heavy load. 6 cu. ft. and may be 300-400 lbs capacity. Thanks and Good Luck! Oldmech

Hi! I make one adaptor with hydraulic pump (from tractor) This adaptor is fit on Grillo quick hitch. This homemade Logsplitter is small but powerfull . All work very well. I join some pict. Good luck ! Oldmech

Hi! My neighbour have a CASE VA 1951 with No PTO .It is hard to find this Option. Where find and the price for. This small tractor look clean. Thanks you! Oldmech

Hi ! For Help other and discussion. I own many two- wheels. They are several make and model. We must look price and quality. For gardening. Medium size tractor I think The GRILLO 85d is the BEST BUY . $2250 with Kohler 10hp. and $2850 with 7hp YANMAR DIESEL. Very Good. BCS 732 is good but...

Hi! I make one adaptor for use my Gravely implements. Front PTO on GRILLO is SAME rotation as GRAVELY. I try this afternoon the 30 in. Gravely mower. Good balance. Easy to drive. Maybe I could remove 1.5 in on bottom of mower for better level I dont know. Later I could try my Gravely snowblower...

Hi! Last year My snowblower Gravely gearbox was broken. I found a good Auger and gearbox from A COLUMBIA 10-28 snowblower Same width same rotation same shaft dia. The Problem was shaft height of Gravely blower vs shaft of Columbia 10-28 Differ 2.5 in. Now I wait for snow. Good luck! Oldmech

Hi! I like my Gravely Diesel The transmission is a MASTERPIECE OF ENGINEERING . Gravely are Best for Snowblowing and all Mowing works . But fronts implements are not the best ideas for gardening. Tractor and you walk on your work. No good! Compaction and humidity losted. The 107d Grillo is a...

I want thanks Milkman for his BCS sulky pictures on other treads.. I make a Hitch from center wheels. With this way the seat dont Unbalance the tractor and no more Up and down. More confortable. Easy to remove two pins two minutes. Easy to make and inexpensive. Thanks and Good Luck! Oldmech

Hi! I just read on Kohler website. The company write They could sell A new range of diesel engines very soon Ask at your dealer. I know Kohler buy LOMBARDINI last year. Lombardini are very good Diesel engines. I hope they have relative good price. Thanks! Oldmech

I Would like use (Dream) the very good Old Gravely implements on BCS tractors. I seen on Gravely website The new Gravely Rapid -M This one can take some old Gravely implements via adaptor 785107. I would like know the BCS PTO Specs. As ROTATION SIDE Front pto CCW or CW . Speed Size of splinned...

Hi! Everybody. I am sad now. Last storm the cylinder of my snowblower hit a large stone under snow. (6 teets are missing on bevel gear). I think parts are hard to find. I plan transform or modify the snowblower First add two steel plates one each side for make as a funnel at to blower. and add...

Hi! I buy a very used John Deere 112 . I fit a Dek-Diesel 10 h.p engine. Just minor grinding Jobs some welding. Crankshaft is about one in. more high and half in. more front .Hood is 3 in. more high. I like Diesel engine. Less maintenance No Carb. Float needle choke No ignition Sparkplug Point...

Hi! No oil no problem! This tractor Lanz Bulldog 1940-45 burn Charcoal or coal . Specification. One cylinder Bore 225 MM x 260MM stroke two cycles Semi-Diesel . The Germany company was Buy by JOHN DEERE in 1960 . May be a day. Thanks Oldmech

I choose a L model with reduction gears . For GOOD SPEED as L8 in low range (May be a little bit sloower) For GOOD BALANCE. I am very happy with this new tractor. The REDUCTION GEARS is A MUST For my adapter. Pic no. 1 How first step: We need crankcase and the input- Sun-gear shaft from the...

40 in. Gravely mower are hard to find here. I found a 42 in. deck in a srap yard. I had at home a damaged (brooken cylinder) 30 in. Gravely reel mower. I take the Gravely reel mower (very good) gear box (Rotation output is reversible) With 8 in. drive pulley. Make a frame for fix all together...

For sale A Gravely L model Serial H 17944 The motor is a OHV one cylinder Engine run very well. The guy want sell it. I think is a Robin engine I dont seen it again. May be next week. Thanks !Oldmech

I look for minimal work of soil. Here is medium and heavy loams First work AT FALL Best implement many thousand years old TURN PLOW I look for. Now I use Gravely rotary plow. I remove two blades and weld a small steel plate at bottom. I use slow speed and 1500 eng.rpm . At SPRING I think it is...

I want thank everybody for report on sulky thread. This help me a lot for my One wheel seat for two wheels tractors. I just finish! I can use standing up or seating. Confortable Compact Very easy to adjust the balance of unit. I was very surprise Just one step on wheel axle make a big change...