Search results

I have a stihl 261cm and a Husky 550xp markII. Either one would be a great saw but I love running the 550xp the best, it just rips through wood.

I honestly debated an F-250 gas and had a few on my radar that were in the $45-47000 range. When it comes to new trucks I have a hang up going over $50k, cars I won’t go over $25,000. I’m weird like that but it does help me stick to what I NEED and not what I WANT.lol This truck suits me fine...

F-150, and RAM are the only two trucks that haven’t made their bed sides impossible too reach over. That’s one of my biggest issues with GM, yeah they have more bed space per cubic feet now but you can’t reach over the side to get access to it. I don’t know how the engineers say around and...

I recently bought a 2021 F150 that had a sticker price of $46790. My 2018 Silverado I had was $48000. The funny thing is the F-150 has a higher payload than the older more expensive truck by about 200lbs, gets better gas mileage, and has some features my older one didn’t have. I know you can...

I recently sold a 5x10 utility trailer I had. Trailer was 12 years old, deck needed replaced ($$$ right now with lumber prices) and needed rewiring and lights. Put it up for $500. I had 143 messages within 2 hours, I counted them. I got exactly $500 for it too, didn’t even try to talk me down...

I have a 0% for 60 months loan with Kubota and I'm paid up through November. I notice on my bill it says "good through August 18" but the next payment isn't due until December. The problem is they add $20 to my balance of the loan every month in the middle of the month if I don't make a payment...

I'm noticing a big increase in trash being dumped on my land as well as the sides of the road in my area. Now, I've always had the occasional fool throw stuff out on my land every now and then but this is becoming a more frequent occurrence and it's making me irate! So far this week I've had two...

What percentage discount is considered "normal" or "good" when comparing prices from the build your own to what the dealer sells them for when it comes to the Gator xuv and Kubota RTV? I just wanted to know how much to expect off compared to the price shown on the build your own website. I know...

Nissan Titan Wears Best Pickup Warranty in America - PickupTrucks.com News

Has anyone ever rented from Blanchard CAT or their local CAT dealer? I need to rent a mini-ex with a thumb for a weekend to finish tearing down an old house so I can get it hauled off. I'm guessing a 9000-10000 would be fine for my uses. I was told it was cheaper to rent straight from the CAT...

Good friend of mine recently bought a "new" to him 2013 Silverado with 79000 miles. It was his cousins truck and he bought it off of him. I rode in it with him yesterday and notice the engine idling pretty rough whenever we would sit still. It was very noticeable but I didn't want to say...

This is insane! Ford's New EcoBoost 3.5-Liter V-6 Offers Monster Torque - PickupTrucks.com News

Here's a better pic of it

They FINALLY agreed to sell me a truck at a fair price and no shenanigans. I said bye to GM and their crazy prices and laughable rebates. I've been a GM man all my life but that will only get you so far. Ford's been catching my eye and they finally got me to bite. You can't beat the rebates...

Googled and found this

Ford Shows Off Updated EcoBoost Powertrain - PickupTrucks.com News

Something weird is going on with KCC because I've paid my payment twice and it has yet to clear my bank or be credited to my account. My payment was due on the 3rd and I made the first payment on the 30th. The 3rd rolls around and no withdrawl from my bank account and no credit to my Kubota...

I recently tore down an old concrete block building on some property I have. Didn't feel like hauling loads of concrete blocks off or renting a roll off dumpster to throw them in, so I did something really stupid.....I put a free add on Craigslist. Boy was that a mistake! Phone constantly rang...

Spied: 218 Ford F-15 Turbo-Diesel - PickupTrucks.com News

Anyone feel like sharing tips on dealing with carpenter bees? Anyone tried any of the traps? Are they legit or just junk? These things try to eat up my tractor shed every spring and I need to know how to get rid of these stupid things! A tennis racket is fun but doesn't seem overly effective.

Has anyone ever had a dealership call them twice a day, every day, for two whole weeks and REFUSE to come down on their asking price? What's the point? I've got to where I don't even answer their calls anymore because it's just a waste of time. Why do they keep calling? Their numbers don't match...

I was having a conversation with a friend the other day and he was wanting to upgrade his tractor to a larger model. He asked me if I knew if dealers took in trades that were financed, I told him I didn't have a clue. I guess it would depend on the dealer and if the tractor was financed through...

My lights on my truck keep blowing out one by one. First it was the daytime running lights(typical of GM), then it was a reverse light, now a headlight. Could this be the alternator overcharging?

Hate taking my truck to the dealership but with these "free maintenance" services it's almost money wasted if you don't. It took these morons over 3 hours to do an oil change and a tire rotation and alignment. THREE HOURS. It didn't take that long to build the **** truck on the assembly line I...

I've never owned a Kubota but have been looking at the L3301 and the L3901 lately. This won't be my main tractor but it will be used for some loader work and odd jobs around the farm, some work in the woods, etc. 30ish hp would fit the bill perfectly for the tasks I have planned for it and I've...

I decided to buy my mom a new car today, 2016 Toyota Camry XSE. I wanted her to look at other brands but she was dead set on another Camry and I wanted her to have nicer features since her 2013 Camry L is pretty plain. The car stickered for $27,xxx and they had LE's on the lot for about $300...

I'm at my wits end with my four wheeler. I had an idling problem where it would idle and gradually slow down until it cut off, didn't matter if it was warm or cold. Fixed all that....I think. Now I was riding it and within 5 mins it started acting like it wasn't getting any fuel and died on me...

2017 Ford Super Duty: Introduction - PickupTrucks.com News

I remember the days when dealership service departments didn't require you to make an appointment for basic things like oil changes and tire rotations and things like that. I have so many "free" services with my 2014 Silverado and it's more of a pain than anything because now the dealerships are...

Last I heard Dixie had been bought out by someone or weren't doing so well. That's what I was told by the dealer in my area that carried them for years and years, now he's strictly Husqvarna.

My Ranger 570 back when it was new.....and clean.

My 2014 is already "dated". Geez. Only two years with the current style? 2016 Chevrolet Silverado 1500 Gets a Face-Lift - PickupTrucks.com News

2004 Toyota Tacoma in Savannah, GA- 11731219 at carmax.com page#tab3 Friend of mine is looking for a truck for his son and asked me about this one. It's a 2004 Tacoma 4wd and has only 35k miles! The catch is it's a 2 owner and was involved in a wreck back in 2005 according to the AutoCheck...

What a joke! I might just have to say forget buying a new truck ever again. This is ridiculous. Ram Cuts Powertrain Warranty for 2016 - PickupTrucks.com News

I have been kicking around the idea that my next truck is going to be a 3/4 ton (or a 1 ton SRW). I'm probably 3 years away from buying but may jump earlier than that if I can find a deal that's just too good to pass up. I don't want a new diesel and the new gas engines in these trucks get gas...

I think I'll need to buy tires for my Ford 3600 sometime this year. I think it has the original ones on it to be honest because they are pretty weather cracked but the tread is still decent(tread appears to match the hours on the tractor). I've run the tires for almost a year but don't want to...

Nice tractor you bought! I like the wide rear tires on it! I bought a 76 3600 last year and have been loving it too. The only downside to these tractors that I know of is the steering columns go out, I just replaced mine but it should be good to go for many years to come. They like to leak...

Well this stinks like all get out. GM to cut Chevy, GMC powertrain warranty to 60,000 miles-report - Yahoo Finance

I inherited an acre of land from my father's estate that I'm not sure what to do with. I say an acre, I would guess it's 1.3 acres or so. It has a well on it that hasn't been used in a couple of years and I'm not paying to have it tested or fixed, has city water hookup, is right next to a busy...

Ford Releases 2015 F-150 Fuel-Economy Numbers - PickupTrucks.com News

Just put my new tires on today.

Here's one pic of it

Got my Ford 3600 delivered last weekend and have had it working around the farm and am loving it! I tried to post some pics from my phone but the app doesn't appear to be working or maybe I'm having issues with my phone(I can't even start a new thread on my phone right now for some reason). I...

M having trouble with my honda not wanting to idle. It will idle fine for a few seconds and then gradually die, acts like it starts starving for fuel. It'll do this when I crank it up and even when I've ridden it for awhile. I've replaced the carb last year, new petcock, took the carb apart and...

It seems like every other month a stray dog shows up at my house and won't leave. I don't feed them, matter of fact I try to chase them away but most of the time they don't move along. I'll take time out of my day to take one to the spca and I swear as soon as I get home it seems like there's...

It was free and figured it should be ok but wanted to ask to be sure.

After years of kicking the idea back and forth and finding all sorts of reasons NOT to buy a utility vehicle, I ended up talking myself into one finally. I looked at several including the Gator 825i and 550, Mule 610, Honda Pioneer, and Polaris Ranger 400 & 570. Ended up buying the 570 in camo...

What in the world is going on??? In the past 2 months every single Dodge and Ford dealership within reasonable driving distance of me have either been bought out by some new dealership that owns 5 other dealerships or they are going partners with them. Now, I'll admit the service was never the...

I've found a few tractors I'm interested in and wanted to get ya'lls take on it. http://www.tractorhouse.com/listingsdetail/detail.aspx?OHID=8734697 http://www.tractorhouse.com/listingsdetail/detail.aspx?OHID=8703446 3000 Ford diesel I'm most interested in the first tractor and have spoken...

I am having to sell one of my tractors because I need to buy a skid steer. Stinks because I just bought this tractor a little over a month ago and have enjoyed it. I've thought about selling one of my other tractors but I use them too much and even though I use this 5325 I use it the least out...

I have been kicking around buying an MX4700 2wd and wanted to see what Barlows could do since I've heard so much about them. I called Friday and Brady wasn't in and another man took my message and I still haven't recieved a call back. I also emailed them this morning and still no response...

Here's some pics my friend sent me that the dealer sent him on the 4240. Is it me or does this tractor seem pretty worn for having only 252 hours on it. Said it was a one owner owned by a builder that trades every 3 years and is the only person who operates his equipment. Look at that bucket...

My friend is wanting to buy a new(or used) tractor. He's really wanting a Kubota and I don't know a lot about them to give him good advice so I came to the experts. He currently has a small tractor (27pto hp, not sure what engine hp) and has a 5' disk and bush hog. He wants to step up to 6'...

Let the Games Begin: Ford and Ram Do Battle Over Best-in-Class Claims - PickupTrucks.com News

See, I wasn't lying.

Came across this '89 John Deere 2155 awhile back. I see the guy has dropped the price from $19,000 to 18,000. That's still too high in my opinion. Granted it does come with a tiller, but to be honest I wouldn't even want that. I'd like to make him an offer and see if he will sell me just the...

Decided to trade in my 5203 mfwd for a 5325 mfwd with 650 hours. Needed a slightly larger tractor and found a good clean one with low hours, and power reverser transmission. Can't go wrong with that! Here's the link to the tractor I'm trading for...

Was car browsing with my girlfriend tonight and noticed something that looked odd. The back hatch was completely left open on a 70k Denali. If that isn't bad enough, we just got tons of rain this weekend! The back didn't look flooded but water did get in and I'm sure mildew will set in. How...

I'm wanting to buy a new push lawn mower here soon. I would love some suggestions on brands or are most push mowers all the same just different colors? I don't really want one with a rear bagger on it and not sure if I want one with self propelled or not. I've looked at ones from Walmart, Lowes...

Got my new registration in the mail today for my new 2014 Silverado. Noticed that the GVW was listed at 10,000#:eek: I looked on the sticker that came with the truck and it had it listed it at 7200#. Needless to say I high-tailed it up to the DMV to straighten them out. After showing them the...

Had to buy another 1/2 ton truck as my Tacoma was awesome, just a bit too small for what I needed. Sure gonna miss it and wish I could afford to keep it as a backup truck. I traded it in on Tuesday and a guy was there buying it yesterday as I was picking up my new truck. All they did was give it...

First Drive: 2013 Ram HD 2500/3500 - PickupTrucks.com News

I bought my mother a 2008 Chevrolet Malibu when the new re-design came out in '08. It's been a nice car overall, pretty reliable, but has started doing stupid little things that have made me question the build quality of it. Things like some gas tank sensor went out in the 3rd year, radio went...

I have been using the same Deere dealer for about 15 years. Before a larger franchise bought them out they were a small, local dealership. When the larger dealer bought them out they retained most of the people from the old one. Everything went right on along like it always did. However, here...

For those that have had to order a loader, how long did it take to come in? Few days? Week? Longer? I just ordered a 553 loader for my tractor and salesman said he'd call when it came in.

First Look: 2014 Toyota Tundra - PickupTrucks.com News

I know Deere recently announced that the power reverser transmission would be offered in the lower horsepower 5E tractors, but apparently you can't order them yet. I tried to build one and I saw the power reverser option but it wouldn't allow me to click on it. I think I'm going to sell my 5203...

I'll admit, I am quite dissapointed. You would think they would have released at least ONE new engine, but all they did was dress up old engines (minus the 6.2 which in my opinion they have ruined by putting on AFM). The "all new" stuff they're touting is either cheesy or has been around since...

I'm on the build your own website and was going to build a 5065m tractor but I don't see where they have one listed? I hadn't heard they were discontinuing this tractor, but from the looks of it, it starts at the 5075m.

I came across this video and thought I'd ask what causes the 3 point hitch to make that loud clicking sound and to bounce like that. is this what some Kubota owners refer to as "jerky 3 point hitch"? 2007 KUBOTA M6040DT For Sale - YouTube

Ram 1500 Likely to Get Turbo-Diesel - PickupTrucks.com News

Can't seem to find the answer I'm looking for in past posts or on Uship's website. Any of you that have ever used Uship before I have a few questions. Do you pay the person that you accept prior to the item being shipped, do you pay them when they arrive at the agreed upon location and you...

Been eyeing this tractor for a couple of weeks now. Dealer about 2 hours from me has it but I haven't had a chance to see it in person yet. I was curious if the price seemed in line for the condition or is it a little high perhaps? I need to find out the hours and whatever else the dealer can...

I've about HAD IT with gas prices and high vehicle taxes in my area!:mad:Had it I tell you! So much so that I'm honestly considering getting rid of my truck and just going to buy some beater pickup and call it a day. so what if it won't pull my trailer, cost too much to do so with the truck that...

Say what you want about Dodge...errrr "Ram" trucks, but they are catching a few eyes. This model refresh is better then some vehicles "all-new and improved" models! 2013 Ram 1500 First Look - PickupTrucks.com News

I wanted to pass it on to you gentleman(and ladies if you read this) that my friends father is finally putting up his 2000-2001(not sure about the year but it's one of the two) f250 7.3 regular cab 4x4. Truck only has 68000 miles(you heard me right) and needs tires and has a rip in the driver...

Since I've had two brand new atv's stolen within the past two years I pretty much learned to live without one around my farm for the past year. I began realizing just how much I missed having one and how much I actually used it, so I talked myself into looking at used atv's. No more new atv's...

I have kicked myself from the first day of owning my 5203 that I didn't opt for the fel. I knew I would eventually get it so the joystick and all the hydraulics are in place, all I need to buy is the fel. I think since the 522 fel is no more there's a new model of fel for these tractors and was...

I've decided my farm needs a tractor STRICTLY for bush hogging. The day I find what I'm looking for, I will bring it home, hook it to the bush hog, and that will be it's life forever. This puts me in the used market, something from the 60's, 70's, 80's and MAYBE early 90's(although the few early...

After a long time debating on a new truck or not, I stopped by my local Chevy dealer to crunch some numbers on a 2011 Chevrolet Silverado HD 2500 LT, white, extended cab, Z71 4x4, Duramax. Sticker price on the truck was $50,610.00(should come with a well and a septic tank if you ask me!!!)...

I was curious why Deere uses a 5cyl in there 5065m and 5075m(formerly the 5225/5325). As far as I can tell theese are the only tractors that Deere puts these engines in. The 4cyl is used in the 5085m on up to through the 6D series, and maybe the 6030 premium tractors(not sure though)? Also Deere...

I stopped by my local Ford dealership yesterday to redeem my free steak dinner due to my "key code" saying I had won in a flyer I recently recieved in the mail. Basically nothing more then to generate traffic into the dealership, I wanted my free steak dinner nonetheless. While I was there and...

thinking about buying my mother a gas powered golf cart for christmas this year and wanted some info and suggestions from anyone in the know. there's a dealer near me that carries Club Car golf carts(both gas and electric powered) so i think i'm going to be looking at those....unless E-Z-Go or...

I own a little under 700 acres of land. about 430 is around my house and then I own a couple other small peices of property on the other side of town. I'm having trouble with people dumping their trash on my land. not much makes me mad, but this absolutley makes my blood boil!!! it seems to go...

somehow i managed to bend the pto shaft on my MX6, along with one of the brackets where the top link of the 3 pt hitch attatches to. how i did it i don't know but it happened sometime last season. i don't remember hitting anything or doing anything that would have caused such damage to my bush...

the pto shaft on my MX6 is frozen and wont extend to hook up to the pto on my tractor. this use to be a fairly easy thing to do, i never had a problem with it.....until now. i haven't used the cutter since last year and it's been stored out of the weather. i took it out to check the gear oil...

i'm looking to buy some commercial grade lawn equipment. it will only be used in my yard, but i've grown tired of buying "box store" grade stuff year after year. i want to buy something that's going to last me a good long while. my list of things i need, in no paticular order, are: push lawn...

I decided it was time for me and my 3yr old John Deere z225 to part ways. After replacing the battery 3 times in 3 years, among some other things, enough was enough. no more "price fighter" homeowner mowers for this guy! i made my mind up that i was going to buy a commercial grade z-turn mower...

been thinking it's time to step up to a commercial grade z-turn mower here pretty soon. something with a 48"-54" deck. needs to fit on a 5x10 trailer. are there any commercial type z-turns out there(new preferrably) i can get for around 5-7k, maybe 8k? closest dealers to me are exmark, hustler...

what type of posted signs do you use on your property? i bought a roll of those yellow paper signs today and plan on going around my property tomorrow to put them up. i'll be using a staple gun. have you noticed any difference in tresspassers before and after putting up the signs? any other tips...

recently, the transmission on my 5203 has become very hard to shift. the ranges shift easily, but the gear selection is becoming harder and harder to shift. anyone have an idea of what the problem might be? i have a year left of warranty so hopefulley this will be covered. the transmission...

I'm planning on buying a 6' disk in the next couple of weeks and had a couple questions about JD rear wheel weights. I was looking on the website and the price for the 110 lb. weights for the rear tires is $147. is that for a set or for each weight? I'm looking to buy 2 sets(2 weights per tire=...

i have a friend who asked me to go look at a tractor with him today. he wants it for using in his garden and doing a little bush hogging around his yeard. it was a good looking MF 30. seems to have been repainted not too long ago, straight sheet metal, didnt see any leaks, started up right away...

i got a flyer in the mail today from Deere advertising their spring specials. as i looked it over, something blue caught my eye. it stood out like a sore thubm in the middle of all that green and yellow. as i read closely i noticed it was a seat for a New Holland tractor:eek: what in the world...

I borrowed my friends disk today to do my firebreaks. they needed to be done badly and I haven't bought a disk for my tractor yet. I have a John Deere 5203 MFWD and his disk is a 6' Tuffline. I'd estimate it to be 800-900lbs according to the specs on Tuffline's Website. my tractor is 56 hp...

I just recieved a flyer from Deere about mobile service for tractors. I thought it was only for compact tractors, but as I read the fine print it says that 5000 series tractors qualify for this service too. my question is, does anyone have this service for their tractor? it lists all tractors...

for mfwd, a loader, cab, clean looking tractor, good name standing behind it, parts availibility, for the price you paid i would say ya done good. so you sink a few $$$'s into it, i guarantee you should be able to get your money back out of it if/when you decide to sell.

congrats on the new tractor! i've always liked the few Challenger tractors i saw, just don't have a dealer close by. the highway department has a few in operation and seem to be doing really well(and you know how those tractors get treated!)

the coolant that came in my tractor is blue. i had a small leak a few days after i got the tractor. i noticed my coolant was a bit low and traced the leak to this, so i just tightened up the screw some and its been fine ever since. i do have a few questions though. i wanted to top off my...

Buddy of mine is selling all his farm equipment this weekend(auction), i was over there this morning talking about cutting corn, going over what he was selling, just small talk. noticed a 6' United box blade in the shed and asked him about it. asked me if I wanted it, I said sure how much? he...

can anyone tell me what i am doing wrong? i was trying to take off my MX6 to hook up my disk, but can't seem to get the pto shaft disconnected from the tractor pto. i've read the manual several times, followed the 3 steps they suggested, but to no avail. seems the cover is supposed to slide back...

does anyone know if JD would finance the loader later on down the road after i paid off my tractor? i looked around on here through some old posts and only found stuff about Kubota and NH doing that. i got the joystick and scv's already on the tractor, but didnt get a loader because i didnt want...

I want to sell my truck, NEED to sell it NOW! i've been trying to sell it for the past 3 1/2 months and haven't had but one serious buyer and he couldn't get financed with his bank. i've been using craigslist(doesn't work, only get those stupid calls from those places that want to charge you a...

a fella I'm friends with informed me yesterday that his father-in-law had this tractor for sale. his hobby is buying old iron, restoring it to new condition and selling them at prices most sell BEFORE restoration. he likes to keep 'em moving that way. he told me to go check this one out and see...

is it just me or are ticks WORSE this year then EVER? i live out in the middle of the woods, my land surrounds me. theres about 3 acres that's cleared out which is my yard etc. forest surrounds me. i was out cutting some firebreaks in my woods the other day and when i finished, i noticed i was...

I was at my dealer today getting filters, trans. fluid, etc and noticed Deere(or maybe it was just my dealer doing this) is offering a FREE 542 fel with a 5603 at a price of $39,999!!! they're also offering a FREE fel with select 6030 and 7000 series tractors(included in this was the 6430). I...

I was just curious as to what your opinion of this situation would be...not that it will change the outcome of it or anything, but I wanted to see if the majority of you thought I was right or wrong. I have a friend, who loves to borrow things and then "forget" to return them. When I say...

if there are any TBN members that live in SC(or anyone that doesn't live in SC), please keep an eye out for my 4 wheeler as it was stolen from my house tonight. it's a 2007 Honda Foreman ES 4x4, black, warn 2500lb. winch, 26" Mudlite XTR tires. it also has a rusted spot on the back rack on the...

i have a 2004 Silverado Z71 and when i bought it i had side boxes installed on it instead of the 'traditional' toolbox. what i was wanting to do was take the sideboxes off, put in a spray-in bedliner and then put on a regular toolbox. what i can't figure out is what am i going to do about all...

still trying to get in order what all i will NEED on my tractor when i decide to buy. with that said, i've heard mention of rear mount SVC's on tractors by some as a MUST. i have read that the new 5003 JD series comes standard with at least one, i think? my question is, what sort of implements...

still trying to get in order what all i will NEED on my tractor when i decide to buy. with that said, i've heard mention of rear mount SVC's on tractors by some as a MUST. i have read that the new 5003 JD series comes standard with at least one, i think? my question is, what sort of implements...

the battery in my tractor died today, and a friend gave me a brand new Everstart Marine Battery. someone had used his boat one time and they bought a bettery to run the trolling motor with and just told him to keep it. its a 720 cranking amps(600 cold crankin amps). is this overkill for a 3 cyl...

wasn't really sure where to properlly post this question so i hope this will be the correct place. i thought i read somewhere on here about how JD has a rebuild program where you send off your tractor and they rebuild it from the ground up for a certain ammount of $$$. if i remember correctly, i...

just curious how many owners of these there are on here. figured i'd ask some "free" questions about proper maintinance for long life. ive had my truck for a little over 3 years(bought new in March '04) and have 42,600 miles so far. only problems were replacing guages(speedometer failure) and a...

i was wondering if anyone knew what models you could get a clam shell on? i asked a dealer(through email) if i could get one on a 5003 series or a 5005 series and his response was..... "I just found out that you can’t put a clam shell on the 522 or 512 loaders John Deere only offers them for...

I have looked through past topics but couldnt find my answer. if you buy a new tractor and add a FEL, does that include the bucket also? or is the bucket seperate? ive seen a few post in the past(couldnt find them again when i looked though), where some people bought a bucket, so i guessed they...

just curious if there were any tractor salesmean/dealers in SC on TBN?

has anyone used a 5103, 5203, or 5303 series JD on the farm? if so, how do you like them? do they hold up well to hard ag work?

after church today I went to the local JD dealer just to look around and see what they had on the lot. I noticed alot of 5103's and about 4 or 5 5303's. the prices on the 5103's were $14,250, is this a good deal, fair, or could i possibally do a little better? They didnt have the prices on the...

5205 with loader it has 1000 hours .It has 16.9-28 rear R1 tires and 905-24 R1 on the front, 1 rear remote and dual mid remotes and block heater it is a 2003 model. tractor is from Canada and they're asking $21000.00(with delivery). tractor seems to be in good shape from pitures. any particular...

Has anyone else happen to notice that the 5x03 series tractors yellow rims seem to fade prematurely in color? I bring up this small point because as I've been shopping around looking at new and used tractors, I have begun to notice this on most 5x03 models that have greater then 200 hours on...

They have this same thread over on the Kubota thread, so I thought I would start one up for my fellow JD owners. Let's hear it....old....new....or even how many do you plan on putting on it when you buy it!haha '78 JD 950- 1,151 hrs.

Hello TBN! I've learned alot by just browsing this past week when I came accross this board and have become addicted. I hope to continue to get some excellent advice, make some new "tractor loving friends", and even offer advice when I can. This is my very first post and I wasn't sure where to...