Search results

Big tractor show in Germany! Coming to the USA soon?

I purchased one from the dealer I bought the tractor from. MT335H. I am a retired metal fabricator and was going to build my own. The problem is I could not find a decent price on the cutting blade.The shipping was as much as the cost of the blade. I finally got one from Behlin Country website...

I see you are from Illinois. Do you ever travel to northern Wisconsin for fishing? There is a place in Marion, WI that is just outside of Clintonville and they advertise on Craigslist. $599 for the Tomahawk 48" forks. Everything he has is made by Tomahawk just no name on it. Take the Mrs. on a...

Speaking of specific angle..... The type of linkage LS has at the top of both factory side links looks as though it would pivot sideways allowing some relief if you were to back up into something. I think the skimpy top rod weld/connection would break off or bend as the angle became more...

Well I finally got around to figuring it out! I had to cut the top eye and flat bar off. Then I turned a rod end with .635 hole on the lathe. I made it a little larger in diameter to keep the hole center away from the cylinder to give me the proper length and make it a little beefier. I now get...

If I lived in Denton,NC I would just go to the AgriStore. :) https://www.agrisupply.com/cutting-edge-for-box-blade/p/28377/ Everything Attachments adds the shipping cost into their initial price ,they don't ship free,nor should they. What is the opinion on the blade from Behlin Country....do...

How is the pricing at these places? Price is the the problem. It should be about $150 to be a fair price.

I am planning on fabricating a 72" Land Plane and need the 2 wear bars/blades. King cutter has them for $139 ea but they want $132 to ship them ea,buy two and the shipping is $264 and so on! They have some available through Digger supply for about $450 a set. Again AgriSupply has them for $139...

So I figure about 150' of 2x2x1/4" tubing. About 25 grizzly bars? That should last forever unless a meteor hits it!

What are the overall dimensions and what is it constructed of. Tubing size and wall thickness. Looks pretty nice! Oh yeah....and what spacing is it adjustable to and what spacing is working best for you.

48" it is then. Visibility and reach. Hadn't thought about the visibility thing. Thanks!

I'm picking up a set of pallet forks with the QA mount. I have a LS MT335H. They are made by Tomahawk out of Indiana. A guy who is located on the way to my property sells their attachments in an unbranded form. I can get the 42" for $575 or the 48" for $599 so price is not a deciding factor. I...

I guess that's why they call it a ditch/stump bucket. If you need to clean out a ditch or make a ditch where there is none I think it would work well. For regularly digging deep trenches not at all. I purchased my backhoe for digging out stumps on land I am hoping to clear. Now I am thinking of...

Black ones cost $39.99........same with John Deere green or Kubota Orange (they know money is no object with those guys! :) ) Blue, red same hooks $23.99, 1/2 the price.

It seems like you can't buy a set of forks alone for $350 + shipping of $100. I was going to fab my own frame....not economical if the forks cost that much.

I recently purchased my first tractor. A LSMT335H and purchased a LB1100 series backhoe with that. The dealer recommended that series as the MT335H has the MT2 frame he said. It is rather slow going. It moves fast as far as the hydraulic speed goes but it is like digging a hole with a teaspoon...

Maybe this is something I should hold off on for now and do it right. I see all those 1.5" rod cylinders are on back order. Only 1.375" in stock for now. Thank you much for the info!

It seems like it was made for similar compact tractors. This is my first tractor so I am learning. My retracted length measured 17.125". I guess I didn't measure if the base end I.D. was .750" or .626". "One New Aftermarket Replacement Hydraulic Side Link Cylinder That Fits Models Across The...

I saw some "restrictor" fittings at the Fleet Farm where I got the hoses. They were 1/2" NPT female swivel x1/2" male NPT with a 1/32" hole drilled in them for flow thru. Does this usually give the proper flow for this application or can you drill that 1/32" hole incrementally larger as needed.

The problem is my tractor is 200 miles away for the time being.I have internet access down here and the tractor up there! So I have to research and purchase here and also fabricate and do any machining. Then load up the trailer bring it up and try it all on for size and take notes and bring back...

I'm installing a hydraulic side link cylinder that has this size port. .563"-18 ORB. It comes with these fittings .563"-18 ORBM X .250" NPTM 90* swivel. I purchased two 1/4" x24" hoses. (they were out of 36") I also have two 1/4" NPTF Male x 1/2" NPTF Female fittings coming in the mail so I...

It all makes sense now!

I ordered the 1.15" size. I will try my best to route them above any metal lines down low and be aware of the snag issue. They will only be pressurized when I am running the grapple but that also seems like the most likely time to snag them.(grapple work) I will have to remember to do a visual...

I'm adding hydraulics to the front for a grapple and will be running two 14' x 1/2" hydraulic hoses from the rear remotes. I want to protect them with some sort of sheathing. Either cover them individually with 1.15" sheathing and tie them together with cable ties or run them both in a 2"...

The hose length came out to 14'. The fleet farm store in WI has a 15% off sale on hoses and cylinders so I got the hoses. I had to go online to get the bulk head hydraulic fitting and paid about $75 for all the fittings. $75 for the hoses. But I have to fabricate a mounting bracket for the...

Why would they design it so you have to use a wrench to check the oil level but have a hand loosened plastic plug for filling the oil...seems ass backward! So you could check it in the field if needed and then fill it back in the shop where you keep the 27mm socket. I just purchased...

I now have about 25 hours on my MT335H and when checking all the fluid levels and greasing ect. I noticed I don't have a dipstick on my right hand front axle oil fill plug. On that page in the manual it shows a picture of the dipstick for the hydraulic oil on the fill plug but no picture of...

When you check on the WIX website it gives this reply..... 40409065 This is a valid competitive part number and there is no replacement at this...

I found 2 or 3 by searching Amazon. I ordered a XL Lock and Lube for $49. I think I will return it. I purchased a different one. I looks pretty good ...the tip is only .531" and it's not overly long...and it comes with a device for cleaning out the fitting and the recess. Something I hadn't...

Thanks again!

I have one that I was able to break free from a drop hitch I had laying around. 1" x2.125" so that should work. Thanks a lot for all the information. What is probably going to happen is the drive will be dried out and I will drive right up with my Rav4 in AWD. You know how that works! Now that...

Thanks....I will be bringing a 5/8" and a 3/4" with me. This may be common knowledge for those who have worked with tractors for awhile but there seems to be no info out there. Hey once I go back up and measure it it will be a moot point but if I have the wrong one it is a 40 minute ride there...

I am 200 miles away from my new tractor and there are many things I did not have time to look at in the 5 hours I initially played with it! I am pulling a trailer full of building supplies this next trip up. I may not be able to make it up the dirt drive way (steep incline) with the trailer if...

What is the price on that grapple and are you having it shipped or does dealer stock it?

It appears to be formulated for tractor diesel engines $12.84 per gallon delivered.

I guess I will just feed a length of garden hose on see what I end up with. This is my first tractor of my own and for all the options and the price it seems like the MT335H can't be beat. A dealer 20 miles from my property had one in stock with 10 hrs on it and I jumped on it. He had new LB1100...

Thanks! I will use that. The price for the premixed is about half the cost of concentrated. The only thing my manual calls for is ASTM D6210 so I'm covered on that. Funny that in the separate thread on antifreeze no one mentions any names of products other than "dealer" brands. I only want it on...

I have the MT335H with the 2 rear remotes. Do you remember what length the long hoses where. I saw a video where an individual with a slightly larger LS tractor said he used 14' hoses. Did you use 1/2" hoses? Thanks for any info.

I have seen every type of fluid /oil mentioned but no heated debates on the best brand of coolant yet! :) I have a new tractor sitting in my garage up north and I am packing in a supply of recommended fluids and filters and tools for my next trip up there. Picking up a new box blade (6') from...