Search results

I had to take a quick peek, and that blown-up diagram, even tho it says 240D, but mine doesn't have the same design; There isn't a plug, shaft, spring, shims etc, but there are 2, 24mm 'caps/plugs'. Looking head on at the stop knob, the 24mms are behind the knob at 3&9 o'clock, and I'd guessed...

Removing seems counter intuitive bec if you add, the spring will be stiffer sooner with more pressure on the ball. No?

I can't check anything until tmrw, but I think you just provided exactly what I've been looking for. The other manuals I've looked at don't have that blow-up or description. Much thx!

O k, but it says 'pressure adj shim'. Shims available for adjusting? Which of these two caps would let me check the ball, spring & shim in the event of a worn ball, weak spring?

Thx. I see the relief valve on a piping diagram blowup, and it also points to the ball & spring, and also says 'shim, for pressure adj' Is there a description of how to access it to check the ball, spring, shim and/or adjust it?

Thx. That looks similar, but I can't make out your reference to the relief pin

Thx. The blow up diagram looks straight forward. I'm also wondering about the pressure adj shim

Thx. I took a break from it today and waiting to hear from a supplier about rebuild kits for pump & valve

No, I don't have a pressure gauge rig that's high enough. I checked the pressure outlet A, and it's clean & clear. I'm tempted to remove the valve to disassemble & inspect o-rings etc Thx

Thx. I'll look

PS Thx

Here's the umpteenth 3-pt question: I decided to connect my ARPS 80 backhoe, has its own hydro pump, to my 240D with ~100lbs diff in spec'd weights; The 80 is less than the 240D's limit, but it simply won't lift it. I've had a 6' brush hog on and it lifts it. Checked/cleaned the screen and...

No, no subframe, and I don't keep trying it JD303

Here's the umpteenth 3-pt question: I decided to connect my ARPS 80 backhoe, has its own hydro pump, to my 240D with ~100lbs diff in spec'd weights; The 80 is less than the 240D's limit, but it simply won't lift it. I've had a 6' brush hog on and it lifts it. Checked/cleaned the screen and...

i have the above mentioned blower attached to my 2135 cub, and when i engage the pto, the belt slips off of the idler pulley and wedges itself between the pulley and it's arm, which starts to stall the engine/burn the belt. it's a new belt, and what i've noticed is that the idler pulley, along...

i have the above mentioned blower attached to my 2135 cub, and when i engage the pto, the belt slips off of the idler pulley and wedges itself between the pulley and it's arm, which starts to stall the engine/burn the belt. it's a new belt, and what i've noticed is that the idler pulley, along...