Search results

I have a B3200 with a power beyond port installed for a backhoe. I recently had a WR Long 3rd Function installed by my dealer. Now I’m adding (on my own) a two spool manual control valve for rear remotes. I have the piping laid out and just want to make sure there is no problem with my design...

I have a well maintained B3200 with 300 hours on it. It has hydrostatic drive with three ranges. I recently added a 50 inch Bush Hog tiller that has a PTO shaft with a slip clutch. I made sure to slip the PTO shaft clutch by following the directions to loosen the bolts, turn it on and make sure...

I have a 2019 L6060HSTC and on hot summer days my AC struggles to keep the cab cool. I regularly blow out and wash the radiator and condenser fins and make sure my cabin external air filter and internal air filters are clean. I plan on tinting my windows eventually, but right now I have the roof...

I have a B3200 that has a BH-76 backhoe sub-frame and rear power beyond ports for the backhoe installed. The backhoe is not normally installed on the tractor, and I want to add 2 rear remotes for use with 3 point implements. Since the backhoe and 3 point implements can’t be installed at the same...

I purchased a used RCK60-27ba mower deck for my 2009 B3200HST. The deck came with all the brackets and hangers, but no installation manual. My tractor also has a backhoe subframe installed. Does anyone know where I can get an installation manual for this deck? Does it require drilling the...

I have a 2019 L6060 HSTC Grand with a OEM (Grammer) air ride seat. I understand that this factory option technically disables the stationary PTO function. You cannot tilt the air ride seat up to operate the PTO in stationary mode, and Kubota offers no official solution. I also know that if I...

I'm looking for some input from owners/users of a John Deere 4052R. I need to upgrade my smaller JD Garden tractors and a Kubota 2320 CUT to a cab tractor to brush cut 25 acres, handle a grapple for down trees/brush removal and normal bucket/pallet fork work. The cab is essential in my...

Hello All: I have a 1989 318 (serial #600XXX) with an Onan P218G engine and about 400 hours on it. I was mowing the lawn, machine was running fine, and it stalled. When I went to restart it, it had to choked, and then it would only run if it is 3/4 choked, and had very little power. It has fresh...

I'm looking for information from 3X20 Cab with Backhoe owners. I am interested in a JD 3520 Cab with the 375 Backhoe, and I would like to know if there is any access to the Backhoe controls from inside the cab? I understand that the Backhoe is normally operated from the rear seat on the Backhoe...

Hello All: I have a 1989 John Deere 318 with an Onan P218G engine and a John Deere AM107421 voltage boost relay installed. The tractor has been starting fine for years. Today when I turned the key, nothing. No starter response at all. Have geed battery voltage, even tried a booster, no...

I have B3200 that I use with a FEL and Backhoe installed. Sometimes I have the need to attach a tow strap to drag a log out of the woods. The BH76 Backhoe blocks access to the drawbar, so I need to attach a nylon tow strap somewhere on the backhoe. The attached image shows where I think I can...