Search results

Can you tell me how that is done. I have seen no strainer when I look in.

`~)

I actually have a camera I use for fishing that would work. I will look around when I get the fuel level down.

Yes and there is no screen and no filler neck. It pretty much goes straight into the tank!

How does that work?

Thanks for the inspiration!

Ya, the 5045E has the chain on the cap----so the good news is----I didn't lose the cap.

Thanks! I guess at that point I would know why it isn't getting fuel! My stupidity!!

Sure hope you are right! Thanks!

Not under warranty. When you say drain the fuel and inspect it, are you saying to try and inspect the tank?

Guess I am human---maybe to human. Filled up the tractor today and then did some spot mowing of CRP. It was dusty off and on. After mowing for about 2 hours, I realized I forgot to screw the cap back on the fuel tank. I am guessing there was close to 5 gallons of diesel that spilled out. The...

I am not sure if it is self leveling or not. I just took it off and will try to straighten it up and put it back on. Thanks.

Do you use it to make sure it is level?

Not sure that is made for the H240? Also not sure I really need one since I didn't even know I had one till I bent it.

Referring to this: #14

I think I may have already answered my own question after doing a bunch of research looking for a replacement spring. Seems I can buy the spring for about 125.00 but, in all honesty, I had no idea what it was even for till doing the research and therefore, I am not sure I should spend the money...

Stumbled onto this thread in searching out what the size of the bolts are for the Pat's EZ Hitch. Are all 4 suppose to be the same length? Mine have bent on one side and had fun getting them out but I got it done without further issue. I thought I had read where they are now using grade 5. Seems...

After putting new pads on my slip clutch after I burnt them out I noticed oil leaking out the side plug. I thought that was weird. It was sitting in the sun and not running at all. I opened up the side plug and oil began spilling out. Probably around a 1/4 to a half pint of oil came out of the...

You wouldn't think it would be that big of deal to find the right linings and, maybe it isn't but I seem to be having difficulty. Not even sure I need to replace them but have a feeling, I didn't do them any good. I was mowing yesterday in Heavy weeds and grass. It started not sounding right and...

New to me! This is the one that I was talking about. I think it is in pretty good shape for a 2012! -------------------------- --------------------------------------------------

I have been toying with the idea of replacing my 425 with a X740. Has the 7 iron 60 inch deck with 214 hours and is a 2012. I have done allot of research on the net and not finding anything close to the price asked. 5790.00 I am thinking this is a great price but need some reassurance from those...

Any thoughts on what would be a good size and model to get for the back blade on a 5045E John Deere? I have a BushHog 7 foot right now that just isn't built up to the toughness needed. We bent a part on it and I want to go a little heavier but not necessarily overkill either. The blade I have...

After doing a search on Google, I found this problem being discussed on this site. I am having the exact same issue with a 5045E, 2014 or 2015 model, not sure which year it is exactly. Only 55 hours. My son actually uses it more than I do and brought the matter to my attention just yesterday...

Oh my, the plot thickens! Thanks allot for your efforts in doing this for me. The two inch pipe spacers has me puzzled. Would that mean the actual width of the tractor itself where the unit attaches is only about 21.25 less 4 inches or 17.25? OK, I think I get it now by looking at this picture...

I have the Pats Easy Hitch on my TT45A and my son has been using it to blade snow with. Says the blade falls off on him as the springs are not holding the little lever in place over the pin or something. Anyway, would there be anything I would like less about going with a fixed speedy type...

Hopefully this will give you the picture.

I just wanted to share the following that I just wrote to an email address I found for New Holland. Might not be the right address but hopefully it will get to the right place. If anyone has a email for corporate office, I think this is where it needs to go: To whom it may concern, I am not sure...

I don't have my tractor near me at this point. About 12 miles away. I just bought and put together a 40 gal. 3 pt sprayer for it but don't want to use the clips that clip to the battery. I think it would make a cleaner install to be able to plug it into the 7 wire implement socket in the back...

I have a Woods MD160 that I think it is time to replace. Bought new in 2000. Doesn't leak and not much of any signs of rust yet but I am wanting to replace it while it still has some trade in value. Anyway, I have been looking hard at the SQ160 Bush Hog and the BB60 Woods. Those both weigh a...

I have been working away trying to get my little TT45A up to snuff. All filters have been changed and it is all cleaned up. A little paint here and a little paint there. Just got in from trying to find all the grease fittings and getting her greased up. This tractor has 100 hours on it. The...

Book calls for New Holland specification NH410B with international specification as API CL4, ISO 32/46 Is there one I can use that meets these qualifications other than the New Holland? My dealer is 30 miles away and I know they will want an arm and a leg for it.

Well, over due for the first oil change but I finally got around to it and am really disappointed in the workmanship. I have written New Holland a note to let them know of the problem. Don't know if anyone else on here has experienced this but here is the problem. The oil filler cap is mounted...

I don't have a loader but I can't figure out by my manual what the pressure is suppose to run. Whoops, I may have just found something in the manual other than the tables on page 3-24. Those are really confusing to me. How about front should be 32 and rear should be 10-16 in the field and 16-26...

I have a TT45A I bought about 2 years ago. My son has been operating it mowing and moving snow in the winter. For some stupid reason, when I read the manual, I thought it said to change the oil every 100 hours and did not catch the part about changing it after the first 50 hours. I have had him...

My son tells me he can't get the telescopic stabilizer hooked up right but I am wondering if he may be missing something, like a hole. He indicates there are 2 holes toward the implement side and the lower arms have to be at to narrow of a width when hooked up to my brush cutter so that it...