woodmaxx

Just got this to clean up all the storm damage in the past year around the homestead. Was going to cost almost double for someone else to do it. Insurance only pays for damage to structures all other tree debris they consider maintenance. At least the insurance money paid for this. This machine...

How do I turn off the draft control do I put the lever on 1 or 10 to make it not work when the Back hoe is on the tractor The arm keep going up and it puts the hoe in a bind and I fave to cut the pin to get it off. Thanks for the help

Later this year I will be in the market for a small flail mower to use with my 1025R in maintaining an acre or so of my property that was cleared with a forestry mulcher recently. The two I have found are from Woodmaxx and Betsco. The Betsco is smaller, and cheaper. For use only a handful of...

Planning to buy a flail mower for my Kioti and I am torn between these mowers. FM62 covers width of rear wheels with ability to offset 10-12 in to the outside of right tire. It is kind of weak in my opinion. Then there is FM78 which allows for plenty of offset which I really like, but Woodmaxx...

I've read through many of the threads regarding flail mowers and I'm seriously considering a WoodMaxx unit. I have one of their snowblowers and have been impressed with the quality of construction and performance with that implement. Pricing on their flail mowers is attractive and the reviews...

I live near Lake Tahoe where the snow is heavy and deep. I keep breaking the 5/16" grade 3 shear bolts literally every 10 minutes. First I have to lift the blower up to an elevation where it is in direct line with the pto shaft, and even with no snow in the blower box, it is a 50/50 proposition...

I have an 84" woodmaxx snow blower and last fall I noticed the wiring from the control box to the motor that runs the swivel and the deflector on the chute was pretty much worn through by my seat rubbing on it. So I cut the wiring and tried to re-install it with new wires. Well, apparently I got...

Fully assembled and ready to go, but never used. Stored in garage since new and still has the 0.1 hours put on it by Woodmaxx factory testing. Assembled with round head bolts on the inside of the chute for smoother branch entry. Filled with ISO 46 fluid and ready to work. Reason for selling –...

I bought this for a very specific property , but the property sold before I got to the clearing part I had planned . Been sitting in the garage unused ever since . Zero hours no use of any kind . Completely built. Premium/ Heavy duty uncut PTO shaft included. 2nd set of OEM blades...

WOODMAXX MX-8600 New In Crate setup for quick hitch 15 pto hp up to 6” I have decided to go in a different direction. I have 3900 in this with shipping. Centerville OH Area. Asking $3200

This is a weathered & faded, but barely used chipper. includes brand new usa made 2nd set of knives, and original owners manual (not yet pictured) can demonstrate. new cost is $3,700 plus tax! If you want to make it look pretty I would wire brush the cover plate and paint it orange. no...

I'm looking to buy a PTO chipper. Originally, I was looking at the Woodland Mills WC68 but that was when I was getting a 40HP tractor. Now that I am getting a 60(57.7) HP tractor with 44.9 HP at the PTO I am looking to size up. The thinking is that the WC68 is rated up to 50 HP at the PTO which...

Buying a PTO chipper. My rig is on the smaller end of viability with 21.7 pto hp. PTO lift is 1600lbs@2ft aft (also FEL + beet juice in all 4 wheels). My use case is primarily conifer (eg, soft), and mostly small (anything ~4" or larger becomes "firepit" firewood). The large input capacity...

I received the chipper new from Woodmaxx.com at the end of September 2020. It currently has 9.4 hours on the hour meter. It is in almost new condition. It includes the heavy duty Premium American Made PTO Shaft. Current (4/7/22) new price at Woodmaxx with standard shipping and sales tax is...

I started out this winter with a new WoodMaxx blower (SB72) on my Kioti DK. I had previously run a Kioti branded blower (Woods?) on a Kioti CK. I log a lot of snowplowing time each winter, sometimes up to 125 hours per season. It's lot of time spent with no cab and driving backwards, so the...

After buying a new property in Northern Maine we bought a WoodMaxx flail mower mode, FM-78H with hammers. It's job is to mow back the fields which haven't been touched in 4+ years. The field was almost all heavy weeds, grasses and brambles, no wood of any diameter worth mentioning other than...

Hey all I hope everyone is doing awsome! I wanted to share my experience with the WoodMaxx brand FM54 Flail mower on my Kubota BX23s. I hope this video helps anybody out there who is on the fence about getting one of these. In the video I asked alot out of that little flail and it...

These two additions make sense when I am working in the orchard and need to do some real clean up. Two pieces of pvc pipe, cap glued on the bottom with drain hole drilled. Plywood and two by four box fastened via one bolt and one pin. Box come off when doing maintenance.

Anyone seen a coupon code recently that works at Woodmaxx. There is a place on the checkout for codes but I can't find anything that works. Planning on buying a chipper.

I finally got around to putting together the chipper I got in the spring, and I want to keep it indoors, so I built a mobile base for it. But the assembly instructions say the support leg should be down for storage, so now I’m wondering about the mobile base. I can’t imagine this thing would...

We take delivery on a 2021 Kioti DK5310HST this week. One of the first uses for this tractor is going to be cleaning up and thinning about 20 acres of mixed forest...ponderosa pine, white pine, white fir, doug fir, etc. We had it selectively logged last summer and there is a ton of broken limbs...

I am planning to buy a PTO driven chipper for my Kubota 3560 tractor. I have been looking at both the Woodland Mills and the Woodmaxx. I have been leaning towards the WM-8H, but I am concerned about how well it will run with only 29 PTO HP. I don't plan to run larger pieces frequently, but...

I am a homeowner of 6 acres, nothing fancy, just a wooded lot that we try to maintain. We live in the south, the wood is mostly pine with a few oaks sprinkled about, we keep the shrub brush areas between the trees cut down. Around the house is clear and maintained with a zero turn, the rest of...

Had my 8M for about 3 years now and I'm having a problem with it where the clutch is jumping out before the tractor really gets loaded. Took it apart today and the two plates that come together are rounded, that's why it's popping out, as the torque rises, it'll ride up and over. I found the...

I just wanted to come back and thank those of you who gave me advice related to my purchase of a WoodMaxx SB-60 Snow Blower!!! First, let me say two things about the snow blower that might help others: (1) I hadn't noticed that the snowblower has a large steel loop at the top center, which...

Ok, I took delivery of a WoodMaxx SB-60, and assembled it this morning. The assembly instructions recommend lubricating the chain with bar & chain oil. I put B&C oil in an oil can and tried applying it along the chain, but it didn't seem that much actually stayed on the chain, and what did only...

Hi; Just wondering-i have a 60 inch Woodmaxx 3ph snowblower that is pretty loud when engaged. I verified it is not my tractor and tractor PTO. The loud growl seems to come from the huge impeller. I verified the recommended oil and oil level in the gear box and lubed the chain regularly with...

What is your experience with a Woodmaxx SB48 3 point hitch, cat 1 snow blower? On paper this looks like a good fit, at a reasonable price for my Kubota B1750HST D. The price is reasonable and the units look like they are well made. Thanks for your advice and comments in advance!

After due consideration, we purchased an MF 1726 a couple months ago (thanks for your input on my past threads). My dealer will be delivering the appropriate Woodmaxx backhoe next week, the one he suggested for this tractor. This is a three-point BH, and in reading the manual is says this is a...

WoodMaxx 8" PTO Wood Chipper - with hydraulic infeed - Yellow Premium USA Made PTO Shaft (NOT for Kubota BX tractors) Complete Replacement Kit(3Piece USA Knife Set, 8 Holo-Krome Bolts, 5 Cogged Belts, Hydraulic Filter) included I Paid $3500.00 for this in 2017 then fell sick. Only used 3.3...

Hey guys, Title says most of it. What say you? Tractor is a CK3510. It has adequate pto hp and lift capacity for either. I have hundreds of trees to clear and I知 sick of feeding burn piles, lol Thanks for your responses!

i was wondering how you like it's overall performance. also, how hard is it to replace knives and anvil. i hear it is a clamshell design, but woodmaxx provides no pictures.

I've had my WoodMaxx chipper for 3 years and love it. But the other day the feed roller stopped working. The problem turned out to be a sheared key in the hydraulic pump drive. The pump shaft slides into a fitting in the main chipper shaft, using only a key and no set screws to transmit the...

I'm in the market for a new flail mower and don't want to pay top dollar for an Alamo or Vrismo. I've had the bottom-end Titan flail mowers, and they simply don't hold up. I can list all the weaknesses. So I'm strongly considering buying a WoodMax FM-78 mower to go behind my Kubota L4060 HSTC...

I spent several hours this morning chipping small trees I pulled from the ground around my field. After cutting off the root balls, I could chip the whole trees. As I was about done, I noticed the chute became clogged -- packed full of chips. I drove back to my barn, removed the chute and...

I have been scouring the Internet looking for the "right" chipper to use on my 80 acres of wooded property. I have all sorts of downed or dead fir, oak, pine and various other nuisance brush that I need to get rid of. I've been waffling between large commercial machines like a Vermeer or...

I had a chance to use my new 3 point hitch-mounted snowblower today. WoodMaxx sure has a good one. It was easy to assemble and took very little effort to get things adjusted. My Massey Ferguson has about 23 HP at the PTO and going through 24" snow today was no problem for the tractor or the...

I am considering installing a 7600 Woodmaxx backhoe on a 2610 kioti. Has anyone used one of these and how do you like the combination. Is it hard on the 3pt. as other hoes use a subframe that is quick detach, I am just curious if it will be hard on the 3pt.

I have a crushed gravel driveway and a snowblower. Anyone in a similar situation knows the driveway isn't usually frozen for the first couple of storms of the season. The problem I found was even though the snowblower has skid shoes that are fairly large they would still just dig in. The...

I have been thinking of ordering a woodmaxx snowblower for the upcoming season. I have one of their motor driven wood chippers and was pleased with my purchase. Just wondering if anyone is running one on a 1533 and if so what size you are running and if your happy with it? Thank you.

Gonna sell my Bush Hog rotary mower and land pride finish mower and get a flail. I mow 20 acres of pasture monthly too keep the weeds down, grass down. No sticks or brush. I mow 3-4 acres weekly finish mower type application. it's not 'the front lawn' so I don't need perfection. but that adds...

I am looking at purchasing a blower. My dealer has two new 74" Farm King blowers sitting in the yard. He has both a regular 3PH model and the pull behind. Anyone using them? I can get a 72" Woodmaxx blower for about $400 less than the Farm King 3 PH normal model. I get about 150" of snow...

Two years ago we started building our home on a land purchased long time ago. This is our own project managed and build by us 99.9% in weekends and vacations. Maybe I'll start a thread about this in the future. Anyhow, part of this large project I started digging the trench this weekend to bring...

Looking at pulling the trigger on one of these two units. Love the Hydro feed option....looked at a bunch of manual gravity fed ones and just can稚 live with the idea of having to baby sit each branch as it goes in. Looked at some gas powered ones, but why not use the torque of the tractor is...

I just got a SB84 for my DK50 tractor, and the shear bolts which came with it for the PTO to the gearbox are snapping like twigs. The manual says they are grade 2, with I would expect to break very easily. What grade are you guys with the same blower using? Grade 5? Grade 7? I was blowing...

I bought the American Made PTO driveshafts for it and when I try to hook it up the blower PTO shaft slides onto the tractor PTO Spline until it gets to the ball detent. Then will all my might I pull back the sleeve that releases the locking "balls" and try to push the pto shaft from the blower...

Sorry this is long. So in late October I reached out to WoodMaxx to use their .mil discount while I was deployed to get a chipper. At the time the chipper wasn't in stock but supposed to be back in production early December which isn't that big of a deal and the emails implied December-ish...

Greetings from Montana, about 30 miles south of Canada. I recently bought a 4000sq ft. metal building that had 12 acres with it. I am going to store all my "stuff" in it along with a wood shop and room to live in. It has three offices I am going to turn into living area and me and the two dogs...

Did my research and settled on a WoodMaxx 8h Arrived crated up as promised, assembly was pretty straight forward. Nothing terribly remarkable. There are some threads here discussion issues with the feed speed control. Here's what I measured on my new chipper: Setting Speed(RPM)...

Putting the Kubota and Chipper to work and pushing some limits just cause

Hi guys I need some help, I have a landpride flail mower that needs new hammer blades. Landpride cost $45 a hammer new and I just refuse to pay anything close to that. Woodmaxx has some that I think will work but when I called woodmaxx they weren驕 just the most helpful citing liability. I was...

Been studying on how to turn clay to good garden soil, and one way seems to be using wood chips for mulch....just keep adding them year after year. Went to a presentation at the MEN fair couple months ago. Guy passed around a jar of his original dirt, then another after a year of wood chips...

My new Woodmaxx FM 54 mower was delivered last week and after setting it up and putting in a couple hours cutting the lawn and some brush I thought I'd share what I've learned. Let me start by saying that I did a lot of research including reading the very long Flail Mower thread and couldn't...

What's your thoughts on a RT-58 woodmaxx tiller for a ck3510h with r4 tires. Do you think it's to small or with the offset will it be okay. If not any other recommendations on a size that others are using. On this size tractor.

I just got a CK3510h and looking to get a tiller for it soon I just got one of woodmaxx flail mower and really like it. I was just wondering if you think the rt-58 will work good with my size tractor or should I look for a bigger size tiller. Also if anyone has any personal experience with this...

I am looking for a new 3 point tiller. I have done a lot of researching on several brands but wanted to ask you guys if anyone has any experience with the WoodMaxx RT-80 or RT-58? I am thinking about ordering the RT-80. It appears to be very heavy & well built but looking for actual feedback...

Has anyone bought one of these, seems expensive and I’m not sure where it’s made. I like the idea that it can be used on different tractors. Thanks in advance.

I have a WoodMaxx FM62H flail mower on order. I have seen videos with FM62 on back of a BX. I am wondering how a B2910 will handle 716 lbs on back of the 3 point. Can it be used without the FEL on? Thanks for any reply's.

I'm looking at buying a 3 point rear snow blower for my Kubota B2650, i have found one from WoodMaxx the SB-60 PTO Snow Blower online for $2,249 or a landpride SB1064 my local dealer has the SB1064 in stock. I'm sure it will cost more just waiting to hear back from them on the price i will be...

I'm looking to buy a chipper and came across woodmaxx, I really like the mx9900 and I have not found any negitive reviews yet, is there anyone on here that has one and has any thing to say about them. Thanks

In late winter, one of our four seasons (early winter, mid winter, late winter, and bad sledding) my wife said "Don't you think it's time we could really use a backhoe around here?" Cool! Probably translated that meant "Quit picking up all this heavy junk you old fart!" The search began. I...

Several folks have asked that I review my Woodmaxx flail mower as there isn't a lot of information about them on TBN now. Video linked below.

I need some thoughts and opinions... I am looking at a Woodmaxx 62" Flail Mower on a BX2200 for mowing my lawn. Some said that I should go with the 54" model, but I want the same cutting width as my 60" MMM. However, most have told me that it will work fine for light duty (general mowing of...

I've been in the market for a homeowner/large (30 acres) acreage wood chipper. I have narrowed my choices down to two brands that I thought would fit my needs - they are the WoodMaxx and the Woodland Mills. I could not find any comparisons on them so I compiled what I think is an accurate...

I've left a short report in the "Reviews" section, but thought I would give a more detailed report here. I've owned a BearCat 73554 chipper/shredder for several years and use it to chip orchard prunings and general tree trimmings around the property. I've always wished for a hydraulic feed...

My new Woodmaxx WM-8H has only two feed speeds. As I move the lever from '1' to '10' on the dial the speed is zero until '3' where it jumps to 17 rpm (28 fpm) then right after that it jumps to 45 rpm (75 fpm) for the rest of the lever travel. I measured with a contact tachometer. It took a...

I am about to move forward with the purchase of the Woodmaxx MX9900. Interested in feed back from anyone who has experince with the Woodmaxx MX9900. It is a little more money than there other units, but the hydrostat, larger fly wheel and overall design seem to make this chipper the most...

I know about the huge flail mowers thread and would prefer to keep this separate and narrow. I need a rough cut mower for maintaining about 25 acres of field, which is currently overgrown with weeds and some bushes / brush. Over time much of it will become orchard or managed vegetable garden...

Has anyone looked at adding a pto chipper to their 1710? I'm looking at the wooax WM-8H: 8" PTO Wood Chipper Tree Chipper Brush Chipper - Hydraulic Feed

It arrived from the Woodmaxx factory in Akron, NY in 3 days. Very well packaged with no damage ! I will use the nice angle iron crate for a new firewood carrying box. Took about 5 hours to get it out of the crate and all assembled. Easy instructions to follow. Had to go get 7 gallons of hyd. oil...

Has anyone had any experience with this Snowblower, I'm thinking of buying the 72" model, looks decent a little concerned about the gearbox if it's China built or American made. The Nortrac brand blower is a few hundred dollars cheaper but I know it's china made and parts are concern later down...

I am getting ready to buy a Woodmaxx WM-8H chipper, but was wondering if Woodmaxx runs any specials on them. It's not a bad price, but with my luck I order something and the next month there is a special deal :rolleyes: Has anyone seen deals in the past? Thanks!

I just bought a new 2016 2032R. I have a Woodmaxx WM-8H chipper on order that hasn't shipped yet. I'm wondering if the electric PTO engagement will be too "abrupt" to spin up a 200 lb rotor, and the tractor engine will stall. Does anyone have experience with that chipper and an electric PTO...

We are ready to buy a PTO chipper and have set our sights on the Woodmaxx WM-8H. We thought about a pull behind chipper, but they are expensive compared to a PTO chipper. Before we pull the trigger, I wanted to ask current Woodmaxx owners a few questions: Have you been happy with your...

Did any of you order the upgraded PTO shaft or stay with the standard one? Is the standard one decent enough? Just ordered a Woodmaxx chipper but didn't choose the upgraded shaft. The chippers are still being built so I think I have some time to change to the upgraded one if the standard one...

A WoodMaxx TM-86H for a Power-Trac 1445 Once you have seen a grass fire go up 1000' of hill side in 20 seconds, you realize that you are either ready for the fire at all times, or not. There is no such thing as "fighting a fire" if it is a wildland fire coming at your property. The fire crews...

I purchased a Woodmaxx WM 8-M. I assembled it and all looked well, until I engaged the pot.and snapped 4 shear pins. I have a Kubota L3301 HST. What could I be doing wrong?

I recently ordered a WoodMaxx 8" hydro feed chipper and it arrived Monday. It should have taken longer based on their website but it showed up in a week so their shipping speed is excellent. When I unloaded it I noticed it was well packed and nothing was missing. I did noticed they added an...

I wanted to share my experiences with my WoodMaxx WM-8600 3-point backhoe. This is the big backhoe they sell, digging depth is 9' and weight with bucket is 1,150 lbs. I've using it for hobby-farm and light construction, strictly personal use. I'm running a mid-90s Case IH 495 utility...

I'm considering purchasing a PTO wood chipper and had always had my eye on the Woodmaxx WM-8H and then I noticed they have a newer model, the MX-9900. I wanted to get opinions on the new model compared to the old as I am not sure the extra 1 inch of capacity is worth the extra $. $2,800 vs...

Found a used Puma 60 inch today for 1500. Says it is about 8 years old and in good shape. I will probably go look at it. For 2100 I can have a new Woodmaxx and add the electronic controls for an additional 350.Tough decision. Any thoughts?

I finally bit the bullet and ordered it June 1. I've been eyeing a Wellenstein Bx42s/52s for years now but the WoodMaxx caught me eye with good reviews and a very competitive price for an 8" hydraulic feed chipper. I want to be clear that the only experience I've had with chippers is a big 12"...

Yea yea, I know, another chipper question. I've got a Kubota L3800 HST that puts out around 32-34HP? at the PTO. For years now, I've been wanting a Wallenstein chipper but have ended up renting a big 12" Vermeer unit once or twice a year at $300 per day. We've done some clearing for food...

I would like to put a 3 PT backhoe on my JD1020. Have read all of the pros and cons on 3 pt and plan to build sub frame as needed. No one seems to make one for the 1020. Has anyone had any recent dealings with Value leader or WoodMaxx?

Well, after lots of helpful advice from TBN, I pulled the trigger on a WoodMaxx TM-86H Chipper. I decided on this one instead of the other "value oriented" chippers due to the hydraulic infeed. With only 18 PTO HP on my 2320, I thought that the hydraulic feed would help with managing the...

I know there are other reviews of the WoodMaxx chipper family out there in the forums, but I was wondering if anyone had a specific insight as to how well the hydraulic infeed system works on the TM-86H Compact-Tractor chipper? From what I've read, this is supposed to be different / better from...

Any members out there who own a. Woodmaxx hydrolac feed chipper ever had any problems with the feed rollers not turning? Woodmaxx thinks it may be the high pressure relief valve is malfunctioning and is sending a replacement. My machine is almost new with probably less than 20 hours total usage.

Woodmaxx pto chippers come partially assembled but crated with a platform and uprights made of rectangular tubing and angle iron. I had this thing sitting around wondering what I was gonna do with it. On the bottom I added some big C iron to house my tractor forks. A couple more pieces of angle...

good afternoon, anyone have a woodmaxx flail? I'm considering a flail mower for about 4 ac. I have a 25 hp tractor...........I'm looking at the 62 model with the cone type blades.... thanks for the input......no flames pls.... good luck, PURA VIDA, bluebonnet2

Does this unit work well with a John Deere 5625?

it looks like few members may have purchased a woodmaxx. Can you provide your owner's experiences?

I recently purchased this backhoe and received it about 3 weeks ago. The price included free liftgate delivery to my home address and it was delivered quickly and in good shape. I ordered it with the optional hydraulic thumb. It was well packed on a pallet and wrapped in cellophane. All...

Just saw this company but not much shows on them- Look very well built and the 72 inch is only $2350-will be using on a Kubota 5740 hst-= any thoughts thanks

Any experience out there with WoodMaxx chippers? I'm considering the WC-8N. I don't need a killer chipper, so this one should do nicely. I've been looking at various models and wanted something with self-feed, which this one has. I also like that it has a pretty hefty flywheel compared to...

Received my Woodmaxx 8 Mechanicl Feed PTO chipper last weekend, took 3 hours to assemble and have used it for about 8 hours on my 28Max and does a great job. Well engineered and built chipper for any money. 28 horse is about as small an engine as I would put it on as I have close to stalled it...

I bought a woodmaxx 8" hydraulic chipper a few months ago. So far I've put 23 hours on the chipper. I run it using my b3030 with 23 hp at the pto and am quite impressed with the performance of the chipper. I mostly chip pine and have chipped up to 5" - 6" diameter pine trunks/branches. Pretty...

Anyone have any experience with Woodmaxx 3-point snow blowers? Their pricing is attractive, and it seems to be a heavy well built unit. Of course, a few photos don't tell you if the design, build quality, customer service, etc., are any good. Driveway is nicely paved and topcoated asphalt...

I'm looking for a PTO backhoe for my Kubota L3400. I've been eying a Wallenstein GX600 that apparently was bought in 2008 and never hooked up. It's been sitting outside since then. The seller recently hooked it up and said it works fine. It requires hydraulic remotes so I'd need to use my...

I'm thinking of adding a chipper to the arsenal. Hydraulic feed would be nice. Has anyone had any experience with WoodMaxx chippers? Any others I should look at? Thanks, Chris

Hello, I'm looking for a good PTO backhoe to run on my 2000 New Holland TC45D The dealer wanted 6795.00 for a Wallenstein. I think a 7' backhoe would be plenty big enough for me, since I only need it to dig out some roots from dead trees on my property. I don't plan on doing any real heavy...

Anyone purchased one? I saw one thread where I believe someone did however it was an older thread and did not get a lot out of it. I'm considering buying a chipper as I have a lot of branches (2"-8") and such all over my property mainly hardwood with some poplar as well. I have rented a unit...

I am looking to purchase a chipper. Looking for feedback on the Woodmaxx 8" vs Jinma 6" pto chippers for clearing a few acres of misc. hardwood and softwood.