Dec 15, 2013 / 1710 Ford Tractor!! #1 F Fishman1227 New member Joined Nov 23, 2013 Messages 21 Location Cassville Tractor Ford 1710 I have a 1710 Ford Tractor. I want to know, can I add a remote Hydraulics for the rear of this tractor? It has already a front end loader on it now.. Thanks
I have a 1710 Ford Tractor. I want to know, can I add a remote Hydraulics for the rear of this tractor? It has already a front end loader on it now.. Thanks
Dec 15, 2013 / 1710 Ford Tractor!! #2 J_J Super Star Member Joined Sep 6, 2003 Messages 18,952 Location JACKSONVILLE, FL Tractor Power-Trac 1445, KUBOTA B-9200HST If you have hyd on it now, is it easy enough to add to the hyd system. Tractor Data says you have a total pump flow of 7.8 GPM. Is this a new type loader valve, with a PB port, and if so, you can add a remote valve.
If you have hyd on it now, is it easy enough to add to the hyd system. Tractor Data says you have a total pump flow of 7.8 GPM. Is this a new type loader valve, with a PB port, and if so, you can add a remote valve.
Dec 15, 2013 / 1710 Ford Tractor!! Thread Starter #3 OP F Fishman1227 New member Joined Nov 23, 2013 Messages 21 Location Cassville Tractor Ford 1710 Ok, I'm not sure about that. What is a PB port??
Dec 15, 2013 / 1710 Ford Tractor!! #4 J_J Super Star Member Joined Sep 6, 2003 Messages 18,952 Location JACKSONVILLE, FL Tractor Power-Trac 1445, KUBOTA B-9200HST If you have a loader valve with PB, you will have seven hoses. You may have the PB port and not using it. Look on your valve and see if there is a stamped PB by one of the ports. PB is used to pass fluid to the next valve. Valves with out PB use the return port to pass fluid to a tank/reservoir.
If you have a loader valve with PB, you will have seven hoses. You may have the PB port and not using it. Look on your valve and see if there is a stamped PB by one of the ports. PB is used to pass fluid to the next valve. Valves with out PB use the return port to pass fluid to a tank/reservoir.
Dec 15, 2013 / 1710 Ford Tractor!! Thread Starter #5 OP F Fishman1227 New member Joined Nov 23, 2013 Messages 21 Location Cassville Tractor Ford 1710 Ok I will go look!! We just got done with a 13" snow.. so it will be a bit before I post back!!
Dec 15, 2013 / 1710 Ford Tractor!! Thread Starter #6 OP F Fishman1227 New member Joined Nov 23, 2013 Messages 21 Location Cassville Tractor Ford 1710 It has 4 coming from the side and 2 from the bottom with a fill line from the trans. Looks like you could add one more if need be, but I'm not sure.
It has 4 coming from the side and 2 from the bottom with a fill line from the trans. Looks like you could add one more if need be, but I'm not sure.
Mar 14, 2014 / 1710 Ford Tractor!! #7 G georgiaplowboy New member Joined Mar 13, 2014 Messages 2 Location martin,Ga Tractor ford I have a 1710 ford tractor with 3 lines coming from the transmission to the control valve for the front loader.Can I hook into 2 of these lines for a 3 point hitch backhoe?If so which lines do I hook into?
I have a 1710 ford tractor with 3 lines coming from the transmission to the control valve for the front loader.Can I hook into 2 of these lines for a 3 point hitch backhoe?If so which lines do I hook into?