hrc810
New member
- Joined
- Apr 10, 2015
- Messages
- 4
- Location
- Virgie, Ky
- Tractor
- 1977 pettibone loadmaster 4000 wheel loader
Hello, I'm new to this and looking for any information on my wheel loader, I bought it several weeks ago and been trying to find out about the lift/tilt and steering hydraulic pump, the original one was removed for repair and got misplaced I installed a single gear pump and got the hydraulics to work but due to the lift/tilt and the steering tied into the same port the steering when in idle mode (char-lynn) valve it looses pressure unless you turn the steering at the same time you are activating the lift/tilt and works slow, I'm looking for a tandem pump with a common supply with a two bolt mounting flange 4 1/2 across the bolts and a "8" splined shaft.
I have contacted several Hydraulic shops and gave them the pump number that is installed now and no one has a clue due to the fact the pump I am using now is a Commercial Inter Tech #321-9110-067 p/n 402071 s/n no82-8021 if anyone has any information on this loader please contact me, thanks for your time Henry
I have contacted several Hydraulic shops and gave them the pump number that is installed now and no one has a clue due to the fact the pump I am using now is a Commercial Inter Tech #321-9110-067 p/n 402071 s/n no82-8021 if anyone has any information on this loader please contact me, thanks for your time Henry