rock2610D
Silver Member
Trying to time my tractor correctly. With clear hose attached to #1 injector line I find that my pump timing must be off.
There are a total of 6 lines/marks on my crank pully. 3 of the lines/marks on my pully have #1,#2, and #3 right next to them. The other 3 lines are about 1 inch ahead of their corrisponding cylinder lines/marks, as engine is rotated clockwise.
When my fuel stops rising in the clear hose my tick mark is right between the mark that says #1 and the other unknown mark.
Which one is the mark I need to hit? The service manual I have states "TIMING MARKS". The photo is too dark to see.
The reason I am asking is because the tractor is VERY hard to start in cold weather IE below 60 deg F.
There are a total of 6 lines/marks on my crank pully. 3 of the lines/marks on my pully have #1,#2, and #3 right next to them. The other 3 lines are about 1 inch ahead of their corrisponding cylinder lines/marks, as engine is rotated clockwise.
When my fuel stops rising in the clear hose my tick mark is right between the mark that says #1 and the other unknown mark.
Which one is the mark I need to hit? The service manual I have states "TIMING MARKS". The photo is too dark to see.
The reason I am asking is because the tractor is VERY hard to start in cold weather IE below 60 deg F.