Anonymous Poster
New member
- Joined
- Sep 27, 2005
- Messages
- 0
4n1 multipurpose buckets.. on all the Kubota loaders for B2710s-B20s and up.
Excellent performance reports over many many years.
Delivered prices range from $1300 to $4100 depending on size, attachments and services provided before installation and/or shipping.
They are a ship-direct item with us and may be shipped in two forms.
1."materials kit form"
2. having been pre-installed and tested .. then removed as "completed kit with hoses - fittings etc. to aid and lessen time and cost for your installment issues. "
The easy on/off toothbars and slip over cutting edges, welded-on chain hooks may be added as well.
The 4n1 bucket weighs more than standard buckets, so (to be safe) you'll need a counterweight on the rear of your tractor for best and safe performance.
Information and photos are at the links listed below.
Thanks and best wishes,
Steve
Email :Steve@carverequipment.com
4 n 1 buckets in action
http://www.carverequipment.com/images/4n1buc2.jpg
Slip over cutting edge
http://www.carverequipment.com/images/slipover_cutting_edge.JPG
Toothbar
http://www.carverequipment.com/images/toothbar.jpg
Info
http://www.carverequipment.com/4n1_multipurpose_bucket.htm
http://www.carverequipment.com/tooth_bars.htm
Excellent performance reports over many many years.
Delivered prices range from $1300 to $4100 depending on size, attachments and services provided before installation and/or shipping.
They are a ship-direct item with us and may be shipped in two forms.
1."materials kit form"
2. having been pre-installed and tested .. then removed as "completed kit with hoses - fittings etc. to aid and lessen time and cost for your installment issues. "
The easy on/off toothbars and slip over cutting edges, welded-on chain hooks may be added as well.
The 4n1 bucket weighs more than standard buckets, so (to be safe) you'll need a counterweight on the rear of your tractor for best and safe performance.
Information and photos are at the links listed below.
Thanks and best wishes,
Steve
Email :Steve@carverequipment.com
4 n 1 buckets in action
http://www.carverequipment.com/images/4n1buc2.jpg
Slip over cutting edge
http://www.carverequipment.com/images/slipover_cutting_edge.JPG
Toothbar
http://www.carverequipment.com/images/toothbar.jpg
Info
http://www.carverequipment.com/4n1_multipurpose_bucket.htm
http://www.carverequipment.com/tooth_bars.htm