George2615
Super Member
I finally ordered and received a Thumb for using on my bucket and forks. I bought it from Greensmachine. I got the 36" model but they have shorter ones. I also bought 2 thumb base plates. One for the forks and one for the bucket.
So, here's the pics over the past couple days.
1-9 Test fitting for best location.
10 - I had to cut out the fork back plate for thumb base plate location. Bought a piece of 3"x3" angle 3/8" thick to mount the base on. Cut it to length and fit it in place.
11 - Drilled 5/8" mount holes in the angle.
12 - Test fit thumb plate.
13-14 Welded in the angle to strengthen the upper section of the back plate back up.
14-18 Also added two vertical uprights where the Q.A. goes.
15-16 Welded using 1/8" 7018
19-21 Primed and painted.
22-26 Installed.
28 - Bolted the base plate on bucket after drilling the 5/8" holes. Thumb base plate bolts are 5/8" Grade 8 with nylon lock nuts.
29-32 Installed and tested.
Easy pin on set up. Just pull 3 pins, change from forks to bucket and pin back on.
Sorry but the pics are out of order. I uploaded them in order but they didn't post properly. Hovering your mouse pointer over the pic should show the pic number.
So, here's the pics over the past couple days.
1-9 Test fitting for best location.
10 - I had to cut out the fork back plate for thumb base plate location. Bought a piece of 3"x3" angle 3/8" thick to mount the base on. Cut it to length and fit it in place.
11 - Drilled 5/8" mount holes in the angle.
12 - Test fit thumb plate.
13-14 Welded in the angle to strengthen the upper section of the back plate back up.
14-18 Also added two vertical uprights where the Q.A. goes.
15-16 Welded using 1/8" 7018
19-21 Primed and painted.
22-26 Installed.
28 - Bolted the base plate on bucket after drilling the 5/8" holes. Thumb base plate bolts are 5/8" Grade 8 with nylon lock nuts.
29-32 Installed and tested.
Easy pin on set up. Just pull 3 pins, change from forks to bucket and pin back on.
Sorry but the pics are out of order. I uploaded them in order but they didn't post properly. Hovering your mouse pointer over the pic should show the pic number.
Attachments
-
$_57.JPG106.7 KB · Views: 173
-
32.JPG285.4 KB · Views: 216
-
31.JPG293.6 KB · Views: 187
-
30.JPG246 KB · Views: 277
-
29.JPG273 KB · Views: 217
-
28.JPG202.7 KB · Views: 211
-
27.JPG281.8 KB · Views: 186
-
26.JPG269.2 KB · Views: 195
-
25.JPG295.6 KB · Views: 418
-
24.JPG251.4 KB · Views: 229
-
23.JPG285.8 KB · Views: 268
-
22.JPG254.8 KB · Views: 249
-
21.JPG173.7 KB · Views: 185
-
20.JPG169.2 KB · Views: 165
-
19.JPG223 KB · Views: 176
-
18.JPG180.7 KB · Views: 151
-
17.JPG182.3 KB · Views: 176
-
16.JPG163.7 KB · Views: 164
-
15.JPG157.4 KB · Views: 145
-
14.JPG177.5 KB · Views: 169
-
13.JPG149.3 KB · Views: 159
-
12.JPG149.6 KB · Views: 161
-
11.JPG166.7 KB · Views: 155
-
10.JPG166.6 KB · Views: 159
-
9.JPG218 KB · Views: 168
-
8.JPG224.1 KB · Views: 162
-
7.JPG195.8 KB · Views: 162
-
6.JPG213.5 KB · Views: 155
-
5.JPG235.6 KB · Views: 212
-
4.JPG232.1 KB · Views: 194
-
3.JPG195.6 KB · Views: 201
-
2.JPG191.6 KB · Views: 177
-
1.JPG214 KB · Views: 204