Adding euro three point hooks

[LouNY]

This is what the 3 most common sizes start out like.
Then you cut off the existing ball swivel on either the fixed draft arm or on an extendable end.
Does not matter, it works with both types of ends.
In other parts of the world these are available from the factories as either std or optional pieces.
This is not the case for North America.
I only have pictures with the extendable ends.

A question for you on the cat 1-2, is that a downsized end that tales the same size ball as the cat 2 but with either size hole bored in it.
I know that my cat 2 lowers take a 2.20" or 56 mm diameter ball,
and my top link takes a 2" ball.
I find it difficult at times to locate the right sized balls for a decent price.

 

[MtnViewRanch]

A question for you on the cat 1-2, is that a downsized end that tales the same size ball as the cat 2 but with either size hole bored in it.
I know that my cat 2 lowers take a 2.20" or 56 mm diameter ball,
and my top link takes a 2" ball.
I find it difficult at times to locate the right sized balls for a decent price.

Yes, 2.2 for the cat 1-2 & cat 2 hooks
While the top link takes a 2" ball, they only offer a full 2" width either in a 1" or 3/4" pin size.
So if you have a narrow (under 2") cat 1 top link mount on an implement, the ball needs to be machined down for width.

This is my supplier. Top Link Balls | Agristore USA

 

[LouNY]

Yes, 2.2 for the cat 1-2 & cat 2 hooks
While the top link takes a 2" ball, they only offer a full 2" width either in a 1" or 3/4" pin size.
So if you have a narrow (under 2") cat 1 top link mount on an implement, the ball needs to be machined down for width.

This is my supplier. Top Link Balls | Agristore USA

Same place I get some from, I have also used Sparex dealers.
Sparex has part# S.3055 D: 1'', OD: 2'', Width: 1 3/4"

 

[xsf18cdf]

This is what the 3 most common sizes start out like.
Then you cut off the existing ball swivel on either the fixed draft arm or on an extendable end.
Does not matter, it works with both types of ends.
In other parts of the world these are available from the factories as either std or optional pieces.
This is not the case for North America.
I only have pictures with the extendable ends.

Went to your website. Are you still doing these? I didn't see a place to order on the site. Would like to send my arms in to have you modify them. Probably need a top-n-tilt as well. Kubota L6060 HSTC.

Thanks,
G

 

[MtnViewRanch]

Went to your website. Are you still doing these? I didn't see a place to order on the site. Would like to send my arms in to have you modify them. Probably need a top-n-tilt as well. Kubota L6060 HSTC.

Thanks,
G

Yes I am still doing the Euro hook connections. I just have not had the time to get anything up on the website.

Please fill out the contact page on my website.
Make a note in the comment position regarding Euro hooks for the draft arms as well as the top link. I will email you a quote in the next 1-2 days.

Thanks

 

[xsf18cdf]

Yes I am still doing the Euro hook connections. I just have not had the time to get anything up on the website.

Please fill out the contact page on my website.
Make a note in the comment position regarding Euro hooks for the draft arms as well as the top link. I will email you a quote in the next 1-2 days.

Thanks

Awesome, thank you, sir.

G

 

[PikaPika]

I hope LouNY and others try to make Eurohooks usable from the tractor cabin.
Here is JD and we can move the lower arm with that link on right..

Right arm is moving with the right lever.
Left arm is hold steady.

and hooks

I was pending patent for these and my Universal quick hitches.
But it take 3 years in USA for inspecting patent papers and they wanted more papers and more money. So I stopped pending because I do not have much time time.
Now everybody and company can fabricate my ideas.
My idea was the back lever for hydraulic 3 point for Valmet 502 and Valmet 702.
After it game those push buttons at back fenders to every tractor.

My Universal QH

 

[tacticalturnip]

Oh wow, Pika, that is impressive.