Matt_Meiser
Bronze Member
I'm in the process of converting my rotary cutter to work with my iMatch. I'm basically working from a set of pictures I took of an LX4 cutter at the Deere dealer and am close to being done. However, I need to add two pins in the linkage. I made the diameter of the holes for these pins 3/4" to match the top link pins on my implements, but they are going to have to be longer than what I think I'll be able to buy so I was thinking of buying some 3/4" rod and making my own pins. I'm wondering if that will work or if I need something harder than mild steel (like tool steel that has been through the heat-quench-temper process?)