RHughes
Silver Member
About a week ago I noticed the brake fluid warning light flickered on when I have my tractor pointed up hill. I checked the fluid and sure enough it was down to the MIN point.
I can't find any major leaks but it appears that there is a slow seep somewhere on the master cylinders; probably been there unnoticed for a while. There are several small fittings and sensors on those cylinders and I don't want to "horsing" down on something with wrench and ruin threads or worse.
Has anyone else experience this on the TN series? If so what was the cure? (Other that the obvious of just adding a little fluid every 75 hrs or so /forums/images/graemlins/grin.gif )
I can't find any major leaks but it appears that there is a slow seep somewhere on the master cylinders; probably been there unnoticed for a while. There are several small fittings and sensors on those cylinders and I don't want to "horsing" down on something with wrench and ruin threads or worse.
Has anyone else experience this on the TN series? If so what was the cure? (Other that the obvious of just adding a little fluid every 75 hrs or so /forums/images/graemlins/grin.gif )