Kelvinseverio
New member
- Joined
- Jan 25, 2024
- Messages
- 4
- Tractor
- Brandon 4815r power shuttle
I have a Branson 4815r shuttle shift stuck in reverse. The shifter won’t come out reverse and go into neutral. Please help
The link goes straight down into the casingFirst get under the tractor and make sure that there isn't a stick wedged in the shift linkage.
Then follow the shifter rod down to the floorboard and make sure the shifting fork is aligned and in proper position.
You might have to remove the rubber floor mat to see that it is shifting
I spray mine with WD40 every now and then.
Have you seen any get stuck in reversei didn’t think they had a power shuttle? I only know of the standard shuttle shif5 4815
This may help,
it's a fairly simple linkage but it is a mechanical shuttle linkage.
Many people abuse these shuttles by trying to operate them like a power shuttle.
They are a synchronized mechanical shuttle.
The foot clutch must be used and it's easier on every component if the brakes are used to stop movement, instead of the syncro's and clutch disc.
View attachment 848793