NH Mike
Bronze Member
- Joined
- Nov 19, 2009
- Messages
- 83
- Location
- Atkinson, NH
- Tractor
- ASV PT-60, Case 310B, Deere B, Ford 8N, Hustler Raptor SD.
I started a new project for the back of my Case 310B. I've been using a new2 me 3pt log splitter on the back of my tractor, but I'm getting tired of lifting the big stuff. So I decided to build a 3pt hoist that will mount on the tractor and will also support the splitter on the back side of it. Building it this way will allow me to use the hoist as a stand alone implement.
I'm posting the videos each day I work on it to Youtube so please take a look and tell me what you think. The pivot assembly may surprise you.
Thanks for looking,
Mike.
YouTube - Building A Log Splitter Hoist #1
YouTube - Building a Log Crane #2
I'm posting the videos each day I work on it to Youtube so please take a look and tell me what you think. The pivot assembly may surprise you.
Thanks for looking,
Mike.
YouTube - Building A Log Splitter Hoist #1
YouTube - Building a Log Crane #2