BX 23 FRONT AXLE LOCKED UP
Good day all,
I need to know if anyone has removed the input shaft shown in the attached picture.
If so what is the procedure, other than get a bigger hammer.
Thanks in advance,
Mainedog
In the second diagram I need to replace shaft 010, all bearings, seals, all items associated with the shaft.
It looks as if the c-clip 060 would release everything, but I'm hearing stories about welding a slide hammer to the splined end and the assembly has to be whacked out.
Any advise is appreciated.
Good day all,
I need to know if anyone has removed the input shaft shown in the attached picture.
If so what is the procedure, other than get a bigger hammer.
Thanks in advance,
Mainedog
In the second diagram I need to replace shaft 010, all bearings, seals, all items associated with the shaft.
It looks as if the c-clip 060 would release everything, but I'm hearing stories about welding a slide hammer to the splined end and the assembly has to be whacked out.
Any advise is appreciated.
Last edited: