sailnseagulls
Bronze Member
After recently added a soft cab with work lights, wiper and strobe to my BX23. After reading some posts about this, I decided to order the upgrade kit and have my dealer install it. The dealer ended up having it a few extra days and the mechanic explained that after hooking everything up, the battery light came on. He then checked the wiring harness that came with it because he had noticed a strip of bare wire where it attaches to the alternator. He put a piece of shrink tube to cover this and checked the continuity of all the wires. He said it checked fine and the alternator was putting out the right current. After installing everything again, the light would come on sometimes at startup. Other times it does not. The dealer returnrd the tractor to me like this and said he was ordering a new harness. After talking to him and the mechanis, they have no explaination. I told him I want another whole kit ordered and installed so I am not plaqued by this forever. He agreed to this. Any ideas what the heck is going on?