BX2350 HST FAN REPLACEMENT

[JOHNTHOMAS]

To our enterprising folks and service organizations out there, THE CHALLENGE:

Figure out how to make that fan into two pieces that bolt it on in a clamp mode. 5 min to change it out. I would stock at least two of them.

KTAC will replace the fan but the $250 deductible pays most instead of them. Plus the down time. I tried the scheme that has been posted but either my BX25 is different or I am missing something. Old guys like me can only lay under that machine for a short time and have limited strength and range of motion.

You DON"T HAVE TO CRAWL UNDER IT!!!!!!!!!! Easy to access this way, very little bending or stooping.

 

[RaydaKub]

Now John, your tractor even with spacers is still only about 4 feet wide. That means that the fan is only about 2 feet off the ground. I'm close to 6 feet, but not ape arms. That sounds like a fair amount of bending yet to me.

You've sure gotten your mileage from those pictures. :laughing:

 

[J F]

No foolin', I thought that originally he posted he just wanted to scratch the belly of the cute lil critter. :laughing:

 

[skyhook]

Sleepin on the job again,...lol