CompactTractorFan
Super Member
I have completed the main frame build for my rollbar.
Paint will be applied. This my favorite "Goodie" to date.
Perhaps because I made it.
CLICK HERE to see the build...
That looks great! :thumbsup:
BX25 Goodies
- Thread starter Artisan
- Start date
That looks great! :thumbsup:
Thanx for the compliments CTF! I disassembled the cage today for
the last time and it was washed, primered and coat #1 of paint has
been applied.
On another "front";
I got another item done, I designed and built a Front Receiver Hitch
that sandwiches the push-bar and the frame as well. I
ran the 2" receiver tube as far back as I could and notched
the top of it to clear the OE center axle pivot bolt. This
will increase the survivability if running at full ramming speed
and if I ram something! Plus my winch will not be tearing
this up any time soon I do believe!
the last time and it was washed, primered and coat #1 of paint has
been applied.
On another "front";
I got another item done, I designed and built a Front Receiver Hitch
that sandwiches the push-bar and the frame as well. I
ran the 2" receiver tube as far back as I could and notched
the top of it to clear the OE center axle pivot bolt. This
will increase the survivability if running at full ramming speed
and if I ram something! Plus my winch will not be tearing
this up any time soon I do believe!
cschulz
Gold Member
Brad, I really like the sandwiched and rear supports. Im just worried it will dig in when rolling down and up threw a ditch for example. I know I have run just my grille gaurd into things with a steep approach. Just a thought?
Chris
Chris
Last edited:
cschulz
Gold Member
I really like the rear reciever. Built like a brick poop house. Jery needs to get those up for sale on his site.
Chris
Chris
tkappeler
Platinum Member
Artisan,
Wow, this thread is like a one-man show! Great stuff. High Quality. Ever think you are in the wrong business?
Wow, this thread is like a one-man show! Great stuff. High Quality. Ever think you are in the wrong business?
radioman
Super Member
artisan- Good stuff! good ideas. the only thing I am concerned about is the wieght of both grill guard and hitch when trying to remove and reinstall both same time in same holes when you want to remove the side bonnet from tractor. How diffucult was it for you to install both same time. was your hitch sandwiched tight enough that it will hold guard so you can lift both via grill guard when installing?
CompactTractorFan
Super Member
Can't wait to see it once it's painted! :thumbsup:
rdl
Bronze Member
Here is a Cotech Snow Pusher for the BX. It comes in 48'' and 54'' with a bolt on top.
Sub Compact Tractor with our Snow Plow | Flickr - Berbagi Foto!
Sub Compact Tractor with our Snow Plow | Flickr - Berbagi Foto!