dannyk
Silver Member
- Joined
- Jun 14, 2001
- Messages
- 179
- Location
- Northern Minnesota
- Tractor
- Kubota and John Deere tractors 20-40HP; skid steer loader
Can\'t attach mower height check chains at front
I have been using a 4 foot rotary cutter with my B7500 (no position control). To avoid the occasional lapse when I lower the three point hitch too far and the mower scalps, I decided to order the check chains (mower height adjustment chains from SSB tractor) that have been recommended on this forum.
I have posted some details in the Kubota Owning Forum, but the bottom line is that the front slotted links that come with the chains cannot be attached to the mounting bracket and pin for the tractor top link.
I'm wondering if anyone has come across a better or different mounting point for the slotted links. (Perhaps the bolts which pass through the base of the fixed ROPS?) Has anyone used these bolts to mount the slotted links? Other ideas?
I would sure like to hear from other users who have used the height limiter chains with a different mounting point for the slotted links.
Thanks,
Dannyk
I have been using a 4 foot rotary cutter with my B7500 (no position control). To avoid the occasional lapse when I lower the three point hitch too far and the mower scalps, I decided to order the check chains (mower height adjustment chains from SSB tractor) that have been recommended on this forum.
I have posted some details in the Kubota Owning Forum, but the bottom line is that the front slotted links that come with the chains cannot be attached to the mounting bracket and pin for the tractor top link.
I'm wondering if anyone has come across a better or different mounting point for the slotted links. (Perhaps the bolts which pass through the base of the fixed ROPS?) Has anyone used these bolts to mount the slotted links? Other ideas?
I would sure like to hear from other users who have used the height limiter chains with a different mounting point for the slotted links.
Thanks,
Dannyk