I have a cs2410 with only 119 hours on it. When I turn the switch, lights come on including glow plug which turn off like normal. I also hear the clicking sound. When I continue to turn to start,it does nothing but the clicking keeps going.
So far here's what I have done.
- taken switch out, tested with ohm meter, didn't get any continuity on start but all others.
- took switch back to dealer to get a new one. Installed it and still won't start. Tells me either switch was good or now something else is wrong.
- battery gives me 12.04V on meter. Solenoid gives me 12.04V as well.
- tried to boost using my truck, nothing.
- tried to cross solenoid to jump starter. Get spark but no starter turns.
- checked start and engine fuses, good.
- of course it is in neutral.
I'm lost at what it could be now. I haven't been able to take dash off as I do not have a steering wheel puller to do that so I'm just squeezing my hands in to work behind the firewall.
I'm not a mechanic and my dealer is not close by.
Thanks for the help. I need my tractor for snow removal now
So far here's what I have done.
- taken switch out, tested with ohm meter, didn't get any continuity on start but all others.
- took switch back to dealer to get a new one. Installed it and still won't start. Tells me either switch was good or now something else is wrong.
- battery gives me 12.04V on meter. Solenoid gives me 12.04V as well.
- tried to boost using my truck, nothing.
- tried to cross solenoid to jump starter. Get spark but no starter turns.
- checked start and engine fuses, good.
- of course it is in neutral.
I'm lost at what it could be now. I haven't been able to take dash off as I do not have a steering wheel puller to do that so I'm just squeezing my hands in to work behind the firewall.
I'm not a mechanic and my dealer is not close by.
Thanks for the help. I need my tractor for snow removal now