OH10
Member
I was out back clearing brush and as I brought the CT 235 back up by the house I discovered the loader arms will only raise half way up. The hydraulic fluid level is full and there are no leaks, I have an EA wicked single gate grapple attached and it is working fine, so does the tilt or curl function. I checked the loader cylinders and they both look ok. I don't know how else I can trouble shoot the problem. Any ideas?
Mike OH10
Belay that last. I did find a leak just now. On one of the hose fittings by the main valve block,
Mike OH10
Belay that last. I did find a leak just now. On one of the hose fittings by the main valve block,
Last edited: