Mechanos
Veteran Member
Rained out on my project, so I thought I do some prep for the compression test. Fabricated a hold down plate for the compression tester adapter and tried to pull one of the injectors just to see if I could get it out. Couldn't get it to budge without a puller, so I'll have to work up a puller to use with my slide hammer. The only thing to attach the puller to is the threads for the fuel line fitting. I don't have a spare fuel line fitting so I'll need to come up with something else to thread onto the injector. So far, I haven't been able to figure out what the thread size and pitch is on the injector.