DL100 SSQA conversion

[not2old]

Putting weight in the tires or on the rear wheels allows more weight on the front wheels and have the load balanced. Putting the weight behind the rear wheels puts part of the weight on the rears (which becomes a pivot point) which leaves less for the front to carry.

 

[piercedtiger]

Putting weight in the tires or on the rear wheels allows more weight on the front wheels and have the load balanced. Putting the weight behind the rear wheels puts part of the weight on the rears (which becomes a pivot point) which leaves less for the front to carry.

ok thanks. That makes sense now.

 

[piercedtiger]

SSQA kit is installed, works great. I did have to mill an extra slot on each bucket adapter plate though. The two original ones did not allow for enough adjustment to match the Massey pin spacing. Took longer to figure out how to clamp them to my table than to cut them though. Once done everything connected right up. I did have to move the included spacers to the inside of the bucket adapters and outside of the loader arms to get the QA spacing right so the bucket didn't slide back and forth a couple inches. Though it wasn't hard to figure out despite the lack of instructions. Definitely worth the price paid! New bucket is perfect for cleaning out the barn and moving compost around. Increase PRV PSI works great too. No noticeable speed decrease.

 

[Devi8]

That is a slick set up! Great Job

 

[piercedtiger]

That is a slick set up! Great Job

Thanks! I really like it. My daughter can take the bucket off by herself in under a minute to get better clearance when mowing for me!

 

[atsah]

Thanks! I really like it. My daughter can take the bucket off by herself in under a minute to get better clearance when mowing for me!

This is my Worksaver SSQA, Love it..