workmytractor
Bronze Member
I see a lot of discussion on TBN about draft control for the boxblade...or whatever implement. I use a MX5100 kubota and have never seen the issues mentioned in some other posts about the boxblade digging in when the front end rides up on a bump, or dropping a load of dirt when the front end dips in a hole.
I could be wrong, but to my knowledge this feature is not built into my Kubota. If I drop the blade all the way down it seems to "float" to the contour of my work area, and does a fine job of grading and leveling dirt. Does anyone know if this feature is sort-a "built in" when the 3PH is dropped all the way down?
I could be wrong, but to my knowledge this feature is not built into my Kubota. If I drop the blade all the way down it seems to "float" to the contour of my work area, and does a fine job of grading and leveling dirt. Does anyone know if this feature is sort-a "built in" when the 3PH is dropped all the way down?