Ridonkulus
New member
Random thoughts as I research rotary cutters.
Is there any advice about using a cutter with a lower gear box rating than your tractor and is the gear box hp rating engine or pto.
Example would be a 60 hp gear box rating on a 67 EHP tractor with 61.7 pto hp. Or a more extreme case a 78 EHP/72 PTO with the same cutter.
Is there any advice about using a cutter with a lower gear box rating than your tractor and is the gear box hp rating engine or pto.
Example would be a 60 hp gear box rating on a 67 EHP tractor with 61.7 pto hp. Or a more extreme case a 78 EHP/72 PTO with the same cutter.