Pooh_Bear
Platinum Member
- Joined
- Jan 2, 2005
- Messages
- 739
- Tractor
- Early 1949 Ford 8N
My brother brought home a hydraulic pump that he got in a trade.
I would like to know the ratings for pressure and flow.
Here is one side of the pump with the ID tag on it.
The other side looks real similar.
Above the left side mounting bolt Tank is cast into it.
Above the right side mounting bolt Press is cast into it.
Here is what the ID tag reads:
And here is a side view of the pump.
The bolts on the bottom are what attaches it.
It has an arrow on top to indicate direction of rotation.
I assume if you need to reverse rotation you just turn it around.
I was told the pump came off a BIG tow truck.
Is there any simple way I can test it.
I appreciate any and all information about this.
Thanks.
Pooh Bear
I would like to know the ratings for pressure and flow.
Here is one side of the pump with the ID tag on it.
The other side looks real similar.
Above the left side mounting bolt Tank is cast into it.
Above the right side mounting bolt Press is cast into it.
Here is what the ID tag reads:
And here is a side view of the pump.
The bolts on the bottom are what attaches it.
It has an arrow on top to indicate direction of rotation.
I assume if you need to reverse rotation you just turn it around.
I was told the pump came off a BIG tow truck.
Is there any simple way I can test it.
I appreciate any and all information about this.
Thanks.
Pooh Bear