Hi,
New to this forum and thanks to all who provide help here. I noticed that I am losing ever so slightly coolant from behind the thermostat housing between the gasket/flange and head. It's just seeping but is causing scale and popping the paint. Looks to me like the gasket needs sealer or replacement. Problem is I cannot get to the bolt behind the fan pulley and it looks as though the pulley and this housing are all in one bolted into the engine with studs and nuts.
The tractor is a Kubota B7100 HST I can get a 10MM wrench on the nut but have no room to turn it to loosen it. No room to get a socket in either. Radiator, shroud and side panels are off.
Any ideas?
Thank you.
New to this forum and thanks to all who provide help here. I noticed that I am losing ever so slightly coolant from behind the thermostat housing between the gasket/flange and head. It's just seeping but is causing scale and popping the paint. Looks to me like the gasket needs sealer or replacement. Problem is I cannot get to the bolt behind the fan pulley and it looks as though the pulley and this housing are all in one bolted into the engine with studs and nuts.
The tractor is a Kubota B7100 HST I can get a 10MM wrench on the nut but have no room to turn it to loosen it. No room to get a socket in either. Radiator, shroud and side panels are off.
Any ideas?
Thank you.