Hyd addation to a 110tlb john Deere backhoe

   / Hyd addation to a 110tlb john Deere backhoe #1  

LANGFORD

New member
Joined
Apr 12, 2015
Messages
17
Location
Burks Falls, Ontario, Canada
Tractor
110 John Deere TLB
I have a 2003 110 John Deere tlb back hoe. I have axillary hoses to the rear bucket that is controlled by a foot petal .

What I would like to do is add a pair of hyd to the front to control the angle snow blade'
Someone suggested "T" ing off the rear stable arms and reaching back to control the front snow blade angle.
any thoughts or have a better method

Thanks all
 
   / Hyd addation to a 110tlb john Deere backhoe #2  
You are looking for what is usually referred to as a loader third function. Most common way is a diverter valve in the curl function of the FEL with a switch on the FEL joystick to operate it. Press the switch and the curl motion of the joystick will now control the extra lines instead of the bucket curl.

Literally dozens and dozens (if not hundreds) of threads on here from others having done the same thing.

'T' into a circuit will not work. With using a T hyd fluid will still flow to both sides. What good it turning your blade if your stabilizers go down at the same time?
 

Tractor & Equipment Auctions

8ft Cr4eep Feeder (A35719)
8ft Cr4eep Feeder...
2) Goodyear Fuel Max 445/20R22.5 Tires (A34127)
2) Goodyear Fuel...
2014 Chevrolet Silverado Crew Cab Pickup, (A35430)
2014 Chevrolet...
2007 20ft Tal International Container, (A35430)
2007 20ft Tal...
100T Hyd Stablizer Jack (A36337)
100T Hyd Stablizer...
2008 Peterbilt 367 Day Cab (A36337)
2008 Peterbilt 367...
 
Top