I have a John Deere 5093E that I am using a bale unroller with. The hydraulic cyclinder will open the arms of the bale unroller, but will not retract to close them. Any ideas.
Allis Chalmers ACD19, ACG; Kubota BX2200 FEL, B2710 FEL, L355SS FEL; Cat D47U, Ford 4600SU FEL
Is this tractor new to you? Any other remote you can try. Switch the hoses at the quick connectors. My 4600 Ford has only lift pressure on one of the valves, same as the 3 pt (no down pressure). If I hookup my NH haybine backwards I have very little lift pressure.
Dennis
If the pressure is good with a test gauge I would try a different cylinder.Also I would test the hoses to the cylinder. Had a hose collapse inside and it would do that. oil would travel one way but when it returned the broken hose would bloke the flow. Just a suggestion.