lennyzx11
Veteran Member
- Joined
- Dec 20, 2015
- Messages
- 1,257
- Location
- Bennington Vermont
- Tractor
- Kubota L3301 HST/LA525 & 1964 Ford 2000 gas
My l3301 came low end of the spec from the dealer and I shimmed it at the tractor relief valve underneath the tractor to be near but not exceed the max. It was a very marked improvement.
As I finish my rear remote setup, I’ve learned that the loader valve and the new rear remote valve bank both have their own relief valve built in.
Whichever one in the power beyond system is set lowest will be the system pressure that is relieved.
Loader valve, rear remote valve, or system hydraulics.
This is separate from the HST system completely also.
It seems like I gained 400 psi back then.
As I finish my rear remote setup, I’ve learned that the loader valve and the new rear remote valve bank both have their own relief valve built in.
Whichever one in the power beyond system is set lowest will be the system pressure that is relieved.
Loader valve, rear remote valve, or system hydraulics.
This is separate from the HST system completely also.
It seems like I gained 400 psi back then.