sea2summit
Elite Member
Trying to repair an old side delivery rake, this is the pulley wheel for the V-Belt that is around the PTO shaft at the center of the rake. I’ve googled everything I can think of and it gives me idler wheels or key slotted style.
5.75” OD
1.5” ID
Four hole, ~2.5” outside to outside ~1/4” diameter holes.
Seems like I should be able to find this easy with the little pop out holes but no luck on these dimensions.
Any help?
5.75” OD
1.5” ID
Four hole, ~2.5” outside to outside ~1/4” diameter holes.
Seems like I should be able to find this easy with the little pop out holes but no luck on these dimensions.
Any help?